[PATCH v2 2/3] pwm: bcm2835: allow pwm driver to be used in atomic context

[Uwe Kleine-König]

Hello Ivaylo,

On Sat, Oct 14, 2023 at 09:51:12AM +0300, Ivaylo Dimitrov wrote:
> On 13.10.23 г. 20:51 ч., Uwe Kleine-König wrote:
> > Hello,
> > 
> > On Fri, Oct 13, 2023 at 01:13:50PM +0200, Alexander Stein wrote:
> > > Am Freitag, 13. Oktober 2023, 13:04:48 CEST schrieb Stefan Wahren:
> > > > Am 13.10.23 um 12:46 schrieb Sean Young:
> > > > > clk_get_rate() may do a mutex lock. Since the clock rate cannot change on
> > > > > an rpi, simply fetch it once.
> > > > 
> > > > does it mean you checked all possible SoCs (BCM2835, BCM2836, BCM2837,
> > > > BCM2711, BCM2712) for this change?
> > > > 
> > > > Is it impossible that the real clock can never be influenced by turbo
> > > > mode like SPI?
> > > 
> > > Assuming the clock can change, which I would, then a clock notifier seems
> > > appropriate. See [1] for an example.
> > 
> > I'm not a fan. If the clock changes, the output also changes. With a
> > clock notifier you can soften the issue and reconfigure to something
> > similar as the original wave form, but a glitch happens for sure.
> > 
> 
> Right, but without notifier, everything rate related after the change will
> be wrong

So we agree clk_rate_exclusive_get() is the way to go?! It's simple, no
need for a notifier and no glitches.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20231014/25bbb7b3/attachment.sig>