[PATCH v2 01/11] pwm: atmel-hlcdc: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions

[Uwe Kleine-König]

This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used, so the corresponding

Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron at huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/pwm/pwm-atmel-hlcdc.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
index 07920e034757..3f2c5031a3ba 100644
--- a/drivers/pwm/pwm-atmel-hlcdc.c
+++ b/drivers/pwm/pwm-atmel-hlcdc.c
@@ -180,7 +180,6 @@ static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = {
 	.div1_clk_erratum = true,
 };
 
-#ifdef CONFIG_PM_SLEEP
 static int atmel_hlcdc_pwm_suspend(struct device *dev)
 {
 	struct atmel_hlcdc_pwm *atmel = dev_get_drvdata(dev);
@@ -210,10 +209,9 @@ static int atmel_hlcdc_pwm_resume(struct device *dev)
 	return atmel_hlcdc_pwm_apply(&atmel->chip, &atmel->chip.pwms[0],
 				     &state);
 }
-#endif
 
-static SIMPLE_DEV_PM_OPS(atmel_hlcdc_pwm_pm_ops,
-			 atmel_hlcdc_pwm_suspend, atmel_hlcdc_pwm_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(atmel_hlcdc_pwm_pm_ops,
+				atmel_hlcdc_pwm_suspend, atmel_hlcdc_pwm_resume);
 
 static const struct of_device_id atmel_hlcdc_dt_ids[] = {
 	{
@@ -297,7 +295,7 @@ static struct platform_driver atmel_hlcdc_pwm_driver = {
 	.driver = {
 		.name = "atmel-hlcdc-pwm",
 		.of_match_table = atmel_hlcdc_pwm_dt_ids,
-		.pm = &atmel_hlcdc_pwm_pm_ops,
+		.pm = pm_ptr(&atmel_hlcdc_pwm_pm_ops),
 	},
 	.probe = atmel_hlcdc_pwm_probe,
 	.remove_new = atmel_hlcdc_pwm_remove,
-- 
2.42.0