[PATCH V2 4/4] clk: meson: c3: add c3 clock peripherals controller driver

[Jerome Brunet]

On Thu 12 Oct 2023 at 16:51, Stephen Boyd <sboyd at kernel.org> wrote:

> Quoting Xianwei Zhao (2023-10-09 23:29:17)
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index 76be4bbd2afb..c8d59d28c8ff 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -140,6 +140,19 @@ config COMMON_CLK_C3_PLL
>>           Say Y if you want the board to work, because PLLs are the parent of most
>>           peripherals.
>>  
>> +config COMMON_CLK_C3_PERIPHERALS
>> +       tristate "Amlogic C3 peripherals clock controller"
>> +       default y
>
> Why are these default y? They should depend on something like ARM64 and
> even then I don't see why we want to enable them by default if we're
> building the ARM64 kernel.

Should indeed depend on ARM64.

Those are the main clock controllers. Like for other AML SoC families,
they are necessary to boot the device which is why they use 'default y'

Is it a problem ?

The whole meson directory depends on ARCH_MESON, so the drivers will go
away if Amlogic support is removed on ARM64.