[PATCH v10 4/7] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver

[Alexander Stein]

Hi Sandor,

thanks for the updated series.

Am Freitag, 13. Oktober 2023, 05:24:23 CEST schrieb Sandor Yu:
> Add a new DRM DisplayPort and HDMI bridge driver for Candence MHDP8501
> used in i.MX8MQ SOC. MHDP8501 could support HDMI or DisplayPort
> standards according embedded Firmware running in the uCPU.
> 
> For iMX8MQ SOC, the DisplayPort/HDMI FW was loaded and activated by
> SOC's ROM code. Bootload binary included respective specific firmware
> is required.
> 
> Driver will check display connector type and
> then load the corresponding driver.
> 
> Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
> Tested-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> ---
> v9->v10:
>  - struct cdns_mhdp_device is renamed to cdns_mhdp8501_device.
>  - update for mhdp helper driver is introduced.
> Remove head file cdns-mhdp-mailbox.h and add cdns-mhdp-helper.h
> Add struct cdns_mhdp_base base to struct cdns_mhdp8501_device.
> Init struct cdns_mhdp_base base when driver probe.
> 
>  drivers/gpu/drm/bridge/cadence/Kconfig        |  16 +
>  drivers/gpu/drm/bridge/cadence/Makefile       |   2 +
>  .../drm/bridge/cadence/cdns-mhdp8501-core.c   | 316 ++++++++
>  .../drm/bridge/cadence/cdns-mhdp8501-core.h   | 365 +++++++++
>  .../gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c | 708 ++++++++++++++++++
>  .../drm/bridge/cadence/cdns-mhdp8501-hdmi.c   | 673 +++++++++++++++++
>  6 files changed, 2080 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.c
>  create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-core.h
>  create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-dp.c
>  create mode 100644 drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c
> 
> [...]
> diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c
> b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c new file mode 100644
> index 0000000000000..73d1c35a74599
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8501-hdmi.c
> @@ -0,0 +1,673 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Cadence MHDP8501 HDMI bridge driver
> + *
> + * Copyright (C) 2019-2023 NXP Semiconductor, Inc.
> + *
> + */
> +#include <drm/display/drm_hdmi_helper.h>
> +#include <drm/display/drm_scdc_helper.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_edid.h>
> +#include <drm/drm_print.h>
> +#include <linux/phy/phy.h>
> +#include <linux/phy/phy-hdmi.h>
> +
> +#include "cdns-mhdp8501-core.h"
> +
> +/**
> + * cdns_hdmi_infoframe_set() - fill the HDMI AVI infoframe
> + * @mhdp: phandle to mhdp device.
> + * @entry_id: The packet memory address in which the data is written.
> + * @packet_len: 32, only 32 bytes now.
> + * @packet: point to InfoFrame Packet.
> + *          packet[0] = 0
> + *          packet[1-3] = HB[0-2]  InfoFrame Packet Header
> + *          packet[4-31 = PB[0-27] InfoFrame Packet Contents
> + * @packet_type: Packet Type of InfoFrame in HDMI Specification.
> + *
> + */
> +static void cdns_hdmi_infoframe_set(struct cdns_mhdp8501_device *mhdp,
> +				    u8 entry_id, u8 packet_len,
> +				    u8 *packet, u8 packet_type)
> +{
> +	u32 packet32, len32;
> +	u32 val, i;
> +
> +	/* only support 32 bytes now */
> +	if (packet_len != 32)
> +		return;
> +
> +	/* invalidate entry */
> +	val = F_ACTIVE_IDLE_TYPE(1) | F_PKT_ALLOC_ADDRESS(entry_id);
> +	writel(val, mhdp->regs + SOURCE_PIF_PKT_ALLOC_REG);
> +	writel(F_PKT_ALLOC_WR_EN(1), mhdp->regs + 
SOURCE_PIF_PKT_ALLOC_WR_EN);
> +
> +	/* flush fifo 1 */
> +	writel(F_FIFO1_FLUSH(1), mhdp->regs + SOURCE_PIF_FIFO1_FLUSH);
> +
> +	/* write packet into memory */
> +	len32 = packet_len / 4;
> +	for (i = 0; i < len32; i++) {
> +		packet32 = get_unaligned_le32(packet + 4 * i);
> +		writel(F_DATA_WR(packet32), mhdp->regs + 
SOURCE_PIF_DATA_WR);
> +	}
> +
> +	/* write entry id */
> +	writel(F_WR_ADDR(entry_id), mhdp->regs + SOURCE_PIF_WR_ADDR);
> +
> +	/* write request */
> +	writel(F_HOST_WR(1), mhdp->regs + SOURCE_PIF_WR_REQ);
> +
> +	/* update entry */
> +	val = F_ACTIVE_IDLE_TYPE(1) | F_TYPE_VALID(1) |
> +		F_PACKET_TYPE(packet_type) | 
F_PKT_ALLOC_ADDRESS(entry_id);
> +	writel(val, mhdp->regs + SOURCE_PIF_PKT_ALLOC_REG);
> +
> +	writel(F_PKT_ALLOC_WR_EN(1), mhdp->regs + 
SOURCE_PIF_PKT_ALLOC_WR_EN);
> +}
> +
> +static int cdns_hdmi_get_edid_block(void *data, u8 *edid,
> +				    u32 block, size_t length)
> +{
> +	struct cdns_mhdp8501_device *mhdp = data;
> +	u8 msg[2], reg[5], i;
> +	int ret;
> +
> +	mutex_lock(&mhdp->mbox_mutex);
> +
> +	for (i = 0; i < 4; i++) {
> +		msg[0] = block / 2;
> +		msg[1] = block % 2;
> +
> +		ret = cdns_mhdp_mailbox_send(&mhdp->base, 
MB_MODULE_ID_HDMI_TX,
> HDMI_TX_EDID, +					     sizeof(msg), 
msg);
> +		if (ret)
> +			continue;
> +
> +		ret = cdns_mhdp_mailbox_recv_header(&mhdp->base, 
MB_MODULE_ID_HDMI_TX,
> +						    HDMI_TX_EDID, 
sizeof(reg) + length);
> +		if (ret)
> +			continue;
> +
> +		ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, reg, 
sizeof(reg));
> +		if (ret)
> +			continue;
> +
> +		ret = cdns_mhdp_mailbox_recv_data(&mhdp->base, edid, 
length);
> +		if (ret)
> +			continue;
> +
> +		if ((reg[3] << 8 | reg[4]) == length)
> +			break;
> +	}
> +
> +	mutex_unlock(&mhdp->mbox_mutex);
> +
> +	if (ret)
> +		DRM_ERROR("get block[%d] edid failed: %d\n", block, ret);
> +	return ret;
> +}
> +
> +static int cdns_hdmi_scdc_write(struct cdns_mhdp8501_device *mhdp, u8 addr,
> u8 value) +{
> +	u8 msg[5], reg[5];
> +	int ret;
> +
> +	msg[0] = 0x54;
> +	msg[1] = addr;
> +	msg[2] = 0;
> +	msg[3] = 1;
> +	msg[4] = value;
> +
> +	mutex_lock(&mhdp->mbox_mutex);

I don't like that locking. Sometimes the mutex is locked by HDMI driver, 
sometimes within the helper.
What is this mutex actually protecting? Concurrent access to the mailbox or a 
programming sequence which must not be interrupted aka critical section? When 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider