[PATCH 7/9] arm64: dts: mediatek: Introduce MT8186 Steelix
Chen-Yu Tsai
wenst at chromium.org
Thu Oct 12 16:02:33 PDT 2023
The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4,
is a convertible device based on a common design of the same name. The
device comes in different variants. Of them, whether a world facing
camera is integrated is the only differentiating factor between the
two device trees added. The different SKU IDs describe this alone.
The other device difference is the touchpad component used. This is
simply handled by having both possible components described in the
device tree, and letting the implementation figure out which one is
actually available. The system bootloader / firmware does not
differentiate this in that they share the same SKU IDs.
Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
---
arch/arm64/boot/dts/mediatek/Makefile | 2 +
.../mt8186-corsola-steelix-sku131072.dts | 18 ++
.../mt8186-corsola-steelix-sku131073.dts | 18 ++
.../dts/mediatek/mt8186-corsola-steelix.dtsi | 197 ++++++++++++++++++
4 files changed, 235 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 442af61b1305..7bd9471b89f9 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -43,6 +43,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
new file mode 100644
index 000000000000..eae17bca8585
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+ model = "Google Steelix board";
+ compatible = "google,steelix-sku131072", "google,steelix",
+ "mediatek,mt8186";
+ chassis-type = "convertible";
+};
+
+&mt6366codec {
+ mediatek,dmic-mode = <0>; /* two-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
new file mode 100644
index 000000000000..a55375b95d0d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+ model = "Google Steelix board";
+ compatible = "google,steelix-sku131073", "google,steelix",
+ "mediatek,mt8186";
+ chassis-type = "convertible";
+};
+
+&mt6366codec {
+ mediatek,dmic-mode = <1>; /* one-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
new file mode 100644
index 000000000000..8488f2f9dc4d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/{
+ pp1000_edpbrdg: regulator-pp1000-edpbrdg {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1000_edpbrdg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp1000_edpbrdg>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 29 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp3300_z2>;
+ };
+
+ pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1800_edpbrdg_dx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp1800_edpbrdg>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&mt6366_vio18_reg>;
+ };
+
+ pp3300_edp_dx: regulator-pp3300-edp-dx {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_edp_dx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp3300_edpbrdg>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 31 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp3300_z2>;
+ };
+};
+
+&dsi_out {
+ remote-endpoint = <&anx7625_in>;
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ anx_bridge: anx7625 at 58 {
+ compatible = "analogix,anx7625";
+ reg = <0x58>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&anx7625_pins>;
+ enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+ vdd10-supply = <&pp1000_edpbrdg>;
+ vdd18-supply = <&pp1800_edpbrdg_dx>;
+ vdd33-supply = <&pp3300_edp_dx>;
+ analogix,lane0-swing = /bits/ 8 <0x70 0x30>;
+ analogix,lane1-swing = /bits/ 8 <0x70 0x30>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ anx7625_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ anx7625_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel: panel {
+ compatible = "edp-panel";
+ power-supply = <&pp3300_disp_x>;
+ backlight = <&backlight_lcd0>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&anx7625_out>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ touchscreen: touchscreen at 5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+ interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&pp3300_s3>;
+ goodix,no-reset-during-suspend;
+ };
+};
+
+&i2c2 {
+ i2c-scl-internal-delay-ns = <22000>;
+
+ /* second source component */
+ touchpad at 2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pin>;
+ vdd-supply = <&pp3300_s3>;
+ wakeup-source;
+ };
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+&pio {
+ anx7625_pins: anx7625-pins {
+ pins1 {
+ pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
+ <PINMUX_GPIO98__FUNC_GPIO98>;
+ output-low;
+ };
+
+ pins2 {
+ pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
+ input-enable;
+ bias-disable;
+ };
+ };
+
+ en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins {
+ pins {
+ pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+ output-low;
+ };
+ };
+
+ en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins {
+ pins {
+ pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
+ output-low;
+ };
+ };
+
+ en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins {
+ pins {
+ pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
+ output-low;
+ };
+ };
+};
--
2.42.0.655.g421f12c284-goog
More information about the linux-arm-kernel
mailing list