[PATCH 1/5] media: dt-bindings: media: imx335: Add supply bindings

[Kieran Bingham]

Add the bindings for the supply references used on the IMX335.

Signed-off-by: Kieran Bingham <kieran.bingham at ideasonboard.com>
---
 .../bindings/media/i2c/sony,imx335.yaml          | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
index a167dcdb3a32..1863b5608a5c 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
@@ -32,6 +32,15 @@ properties:
     description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
     maxItems: 1
 
+  avdd-supply:
+    description: Analog power supply (2.9V)
+
+  ovdd-supply:
+    description: Interface power supply (1.8V)
+
+  dvdd-supply:
+    description: Digital power supply (1.2V)
+
   reset-gpios:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1
@@ -60,6 +69,9 @@ required:
   - compatible
   - reg
   - clocks
+  - avdd-supply
+  - ovdd-supply
+  - dvdd-supply
   - port
 
 additionalProperties: false
@@ -79,6 +91,10 @@ examples:
             assigned-clock-parents = <&imx335_clk_parent>;
             assigned-clock-rates = <24000000>;
 
+            avdd-supply = <&camera_vdda_2v9>;
+            ovdd-supply = <&camera_vddo_1v8>;
+            dvdd-supply = <&camera_vddd_1v2>;
+
             port {
                 imx335: endpoint {
                     remote-endpoint = <&cam>;
-- 
2.34.1