[PATCH RESEND] arm64: defconfig: add support for MediaTek MT7986

[Lorenz Brun]

Considering that there are boards based on this SoC with 2GiB+ RAM and
PCIe out there (BPI-R3) I think it makes sense to have support for these
in defconfig as people can conceivably use these with stock Linux
distributions.

AFAIK this only adds modules, it should not increase the size of the
main vmlinux binary.

Signed-off-by: Lorenz Brun <lorenz at brun.one>
---
 arch/arm64/configs/defconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index a25d783dfb95..13a1e09524d4 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -162,6 +162,7 @@ CONFIG_IP6_NF_TARGET_MASQUERADE=m
 CONFIG_BRIDGE=m
 CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_NET_DSA=m
+CONFIG_NET_DSA_MT7530=m
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_VLAN_8021Q_MVRP=y
@@ -177,6 +178,8 @@ CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_NET_ACT_MIRRED=m
 CONFIG_NET_ACT_GATE=m
+CONFIG_NET_VENDOR_MEDIATEK=y
+CONFIG_NET_MEDIATEK_SOC=m
 CONFIG_QRTR_SMD=m
 CONFIG_QRTR_TUN=m
 CONFIG_CAN=m
@@ -267,9 +270,11 @@ CONFIG_MTD_SST25L=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_NAND_MARVELL=y
+CONFIG_MTD_NAND_MTK=m
 CONFIG_MTD_NAND_BRCMNAND=m
 CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_NAND_QCOM=y
+CONFIG_MTD_NAND_ECC_MEDIATEK=m
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=m
 CONFIG_UBIFS_FS=m
@@ -407,6 +412,8 @@ CONFIG_BRCMFMAC=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
 CONFIG_MWIFIEX_PCIE=m
+CONFIG_MT7915E=m
+CONFIG_MT7986_WMAC=y
 CONFIG_MT7921E=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SDIO=m
@@ -529,6 +536,7 @@ CONFIG_SPI_MESON_SPICC=m
 CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_MT65XX=y
 CONFIG_SPI_MTK_NOR=m
+CONFIG_SPI_MTK_SNFI=m
 CONFIG_SPI_OMAP24XX=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
@@ -645,6 +653,8 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
+CONFIG_MTK_THERMAL=y
+CONFIG_MTK_SOC_THERMAL=m
 CONFIG_IMX_SC_THERMAL=m
 CONFIG_IMX8MM_THERMAL=m
 CONFIG_QORIQ_THERMAL=m
-- 
2.41.0