[PATCH 19/21] google/gs101: Add dt overlay for oriole board

[Rob Herring]

On Thu, Oct 05, 2023 at 04:56:16PM +0100, Peter Griffin wrote:
> The LK bootloader on Pixel6 searches for a dt overlay in the
> dtbo partition with a board_id and board_rev that matches
> what is baked into the device. If this overlay is not present
> then the phone will bootloop in fastboot and you can't boot
> the upstream kernel.
> 
> This commit adds a dtbo for the production oriole variant.
> The other pre-production board overlays are not included
> at this time.
> 
> Adding the dtbo here allows for a better experience when
> building/booting the upstream kernel on Pixel devices
> as all the DT required to boot the device will be created
> as part of the kernel build process. Rather than having to
> fetch the dtbo from some other repo.
> 
> Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
> ---
>  arch/arm64/boot/dts/google/Makefile          |  1 +
>  arch/arm64/boot/dts/google/gs101-oriole.dtso | 21 ++++++++++++++++++++
>  2 files changed, 22 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dtso
> 
> diff --git a/arch/arm64/boot/dts/google/Makefile b/arch/arm64/boot/dts/google/Makefile
> index 6d2026a767d4..3f1761f8daa9 100644
> --- a/arch/arm64/boot/dts/google/Makefile
> +++ b/arch/arm64/boot/dts/google/Makefile
> @@ -2,5 +2,6 @@
>  
>  dtb-$(CONFIG_ARCH_GOOGLE_TENSOR) += \
>  	gs101-oriole.dtb \
> +	gs101-oriole.dtbo

Overlays in the kernel must be able to be applied to a base DT in the 
kernel. Add a rule to apply this (hint: a '-dtbs' variable does this 
similar to -objs variables).

> diff --git a/arch/arm64/boot/dts/google/gs101-oriole.dtso b/arch/arm64/boot/dts/google/gs101-oriole.dtso
> new file mode 100644
> index 000000000000..50832fd94204
> --- /dev/null
> +++ b/arch/arm64/boot/dts/google/gs101-oriole.dtso
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Oriole DVT Device Tree

Doesn't DVT mean pre-production?

Rob