[PATCH v6 2/7] arm64: dts: ti: k3-j784s4: Add ESM instances

[J, KEERTHY]

On 10/5/2023 4:45 PM, Nishanth Menon wrote:
> On 06:45-20231005, J, KEERTHY wrote:
>>
>>
>> On 10/3/2023 12:20 PM, Vignesh Raghavendra wrote:
>>>
>>>
>>> On 27/09/23 08:03, Keerthy wrote:
>>>> Patch adds the ESM instances for j784s4. It has 3 instances.
>>>> One in the main domain and two in the mcu-wakeup domian.
>>>>
>>>> Signed-off-by: Keerthy <j-keerthy at ti.com>
>>>> ---
>>>>    arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi       |  8 ++++++++
>>>>    arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 14 ++++++++++++++
>>>>    2 files changed, 22 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>>>> index efed2d683f63..26dc3776f911 100644
>>>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>>>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>>>> @@ -1568,4 +1568,12 @@
>>>>    		firmware-name = "j784s4-c71_3-fw";
>>>>    		status = "disabled";
>>>>    	};
>>>> +
>>>> +	main_esm: esm at 700000 {
>>>> +		compatible = "ti,j721e-esm";
>>>> +		reg = <0x00 0x700000 0x00 0x1000>;
>>>> +		ti,esm-pins = <688>, <689>, <690>, <691>, <692>, <693>, <694>,
>>>> +			      <695>;
>>>> +		bootph-pre-ram;
>>>
>>> Similar to other nodes in this file, here and elsewhere use
>>> 		bootph-all
>>
>> Okay. I will switch to bootph-all
> 
> Is'nt esm configuration just needed during pre-ram?

This is needed only the R5 SPL phase. So bootph-pre-ram looks better suited.

https://u-boot.readthedocs.io/en/latest/develop/driver-model/of-plat.html

Vignesh,

This ESM nodes should be bootph-pre-ram. I will keep that flag as is.

Best Regards,
Keerthy
> 
>>
>>>
>>>
>>>> +	};
>>>>    };
>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
>>>> index 4ab4018d3695..a7b5c4cb7d3e 100644
>>>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
>>>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
>>>> @@ -700,4 +700,18 @@
>>>>    			status = "disabled";
>>>>    		};
>>>>    	};
>>>> +
>>>> +	mcu_esm: esm at 40800000 {
>>>> +		compatible = "ti,j721e-esm";
>>>> +		reg = <0x00 0x40800000 0x00 0x1000>;
>>>> +		ti,esm-pins = <95>;
>>>> +		bootph-pre-ram;
>>>> +	};
>>>> +
>>>> +	wkup_esm: esm at 42080000 {
>>>> +		compatible = "ti,j721e-esm";
>>>> +		reg = <0x00 0x42080000 0x00 0x1000>;
>>>> +		ti,esm-pins = <63>;
>>>> +		bootph-pre-ram;
>>>> +	};
>>>>    };
>>>
>