[PATCH v4 4/4] firmware: arm_scmi: Add qcom hvc/shmem transport support

[Brian Masney]

On Mon, Sep 11, 2023 at 12:43:59PM -0700, Nikunj Kela wrote:
> This change adds the support for SCMI message exchange on Qualcomm
> virtual platforms.
> 
> The hypervisor associates an object-id also known as capability-id
> with each hvc doorbell object. The capability-id is used to identify the
> doorbell from the VM's capability namespace, similar to a file-descriptor.
> 
> The hypervisor, in addition to the function-id, expects the capability-id
> to be passed in x1 register when HVC call is invoked.
> 
> The function-id & capability-id are allocated by the hypervisor on bootup
> and are stored in the shmem region by the firmware before starting Linux.
> 
> Signed-off-by: Nikunj Kela <quic_nkela at quicinc.com>
> ---
>  drivers/firmware/arm_scmi/driver.c |  1 +
>  drivers/firmware/arm_scmi/smc.c    | 47 ++++++++++++++++++++++++++----
>  2 files changed, 43 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
> index 87383c05424b..ea344bc6ae49 100644
> --- a/drivers/firmware/arm_scmi/driver.c
> +++ b/drivers/firmware/arm_scmi/driver.c
> @@ -2915,6 +2915,7 @@ static const struct of_device_id scmi_of_match[] = {
>  #ifdef CONFIG_ARM_SCMI_TRANSPORT_SMC
>  	{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
>  	{ .compatible = "arm,scmi-smc-param", .data = &scmi_smc_desc},
> +	{ .compatible = "qcom,scmi-hvc-shmem", .data = &scmi_smc_desc},
>  #endif
>  #ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
>  	{ .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc},
> diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
> index 0a0b7e401159..94ec07fdc14a 100644
> --- a/drivers/firmware/arm_scmi/smc.c
> +++ b/drivers/firmware/arm_scmi/smc.c
> @@ -50,6 +50,9 @@
>   * @func_id: smc/hvc call function id
>   * @param_page: 4K page number of the shmem channel
>   * @param_offset: Offset within the 4K page of the shmem channel
> + * @cap_id: hvc doorbell's capability id to be used on Qualcomm virtual
> + *	    platforms
> + * @qcom_xport: Flag to indicate the transport on Qualcomm virtual platforms
>   */
>  
>  struct scmi_smc {
> @@ -63,6 +66,8 @@ struct scmi_smc {
>  	u32 func_id;
>  	u32 param_page;
>  	u32 param_offset;
> +	u64 cap_id;
> +	bool qcom_xport;
>  };

[snip]

>  static irqreturn_t smc_msg_done_isr(int irq, void *data)
> @@ -129,6 +134,7 @@ static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
>  	struct resource res;
>  	struct device_node *np;
>  	u32 func_id;
> +	u64 cap_id;
>  	int ret;

[snip]

> +		func_id = readl((void __iomem *)(scmi_info->shmem) + size - 16);
> +#ifdef CONFIG_ARM64
> +		cap_id = readq((void __iomem *)(scmi_info->shmem) + size - 8);
> +#else
> +		/* capability-id is 32 bit wide on 32bit machines */
> +		cap_id = readl((void __iomem *)(scmi_info->shmem) + size - 8);
> +#endif

The 32 bit case is defined as a u64 in two places above.

> +
> +		/* The func-id & capability-id are kept in last 16 bytes of shmem.
> +		 *     +-------+
> +		 *     |       |
> +		 *     | shmem |
> +		 *     |       |
> +		 *     |       |
> +		 *     +-------+ <-- (size - 16)
> +		 *     | funcId|
> +		 *     +-------+ <-- (size - 8)
> +		 *     | capId |
> +		 *     +-------+ <-- size
> +		 */

Personally I'd add one more space to the right side of the table after
funcId.

> -	arm_smccc_1_1_invoke(scmi_info->func_id, page, offset, 0, 0, 0, 0, 0,
> -			     &res);
> +	if (scmi_info->qcom_xport)
> +		arm_smccc_1_1_hvc(scmi_info->func_id, cap_id, 0, 0, 0, 0, 0, 0,
> +				  &res);
> +	else
> +		arm_smccc_1_1_invoke(scmi_info->func_id, page, offset, 0, 0, 0,
> +				     0, 0, &res);

Does it make sense to call this variable qcom_xport? Would hvc_xport be
a more appropriate name?

Brian