[PATCH v5 9/9] arm64: dts : ti: k3-am69-sk: Add DDR carveout memory nodes for C71x DSP

[Apurva Nandan]

Two carveout reserved memory nodes each have been added for each of the
C71x DSP for the TI K3 AM69 SK boards. These nodes are assigned to the
respective rproc device nodes as well. The first region will be used as
the DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.

The current carveout addresses and sizes are defined statically for each
device. The C71x DSP processor supports a MMU called CMMU, but is not
currently supported and as such requires the exact memory used by the
firmware to be set-aside.

Signed-off-by: Sinthu Raja <sinthu.raja at ti.com>
Signed-off-by: Apurva Nandan <a-nandan at ti.com>
Reviewed-by: Udit Kumar <u-kumar1 at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am69-sk.dts | 104 ++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 3cde9c644613..bc1d21ff6d03 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -143,6 +143,54 @@ main_r5fss2_core1_memory_region: r5f-memory at a7100000 {
 			reg = <0x00 0xa7100000 0x00 0xf00000>;
 			no-map;
 		};
+
+		c71_0_dma_memory_region: c71-dma-memory at a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory at a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_1_dma_memory_region: c71-dma-memory at a9000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa9000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_1_memory_region: c71-memory at a9100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa9100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_2_dma_memory_region: c71-dma-memory at aa000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xaa000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_2_memory_region: c71-memory at aa100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xaa100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_3_dma_memory_region: c71-dma-memory at ab000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xab000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_3_memory_region: c71-memory at ab100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xab100000 0x00 0xf00000>;
+			no-map;
+		};
 	};
 
 	vusb_main: regulator-vusb-main5v0 {
@@ -400,6 +448,34 @@ mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
 	};
 };
 
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster5 {
+	status = "okay";
+	interrupts = <416>;
+	mbox_c71_2: mbox-c71-2 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_3: mbox-c71-3 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
 &wkup_uart0 {
 	/* Firmware usage */
 	status = "reserved";
@@ -562,3 +638,31 @@ &main_r5fss2_core1 {
 	memory-region = <&main_r5fss2_core1_dma_memory_region>,
 			<&main_r5fss2_core1_memory_region>;
 };
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};
+
+&c71_2 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5>, <&mbox_c71_2>;
+	memory-region = <&c71_2_dma_memory_region>,
+			<&c71_2_memory_region>;
+};
+
+&c71_3 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5>, <&mbox_c71_3>;
+	memory-region = <&c71_3_dma_memory_region>,
+			<&c71_3_memory_region>;
+};
-- 
2.34.1