[PATCH v5 4/4] arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board

[Josua Mayer]

Hi Shawn,

Thank you for the review.

@all - some of you have received this email including HTML,
this is attempted resend as plain text ...

Am 24.09.23 um 15:51 schrieb Shawn Guo:
> On Fri, Aug 18, 2023 at 01:10:16PM +0200, Josua Mayer wrote:
>> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
>> index a750be13ace8..9448d2effd8a 100644
>> --- a/arch/arm64/boot/dts/freescale/Makefile
>> +++ b/arch/arm64/boot/dts/freescale/Makefile
>> @@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
>>   dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
>>   dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
>>   dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
>> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-clearfog.dtb
> Out of alphabetical order.
Ack.
>> +
>> +		led_sfp_at: led-sfp-at {
>> +			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* PROC_IRQ5 */
>> +			default-state = "off";
>> +		};
> Have a newline between nodes.
Ack.
>> +&i2c2 {
> This label node seems out of alphabetical order.
Ack.
>> +&esdhc1 {
>> +	status = "okay";
>> +	bus-width = <8>;
>> +	mmc-hs200-1_8v;
>> +	mmc-hs400-1_8v;
> We usually have 'status' be the last property.

You are not the first to notice this, but somehow in each version I 
forgot about changing it :(.
v6 will for sure put this status property in last place!

> Shawn

sincerely
Josua Mayer