[PATCH v7 2/2] arm64: boot: Support Flat Image Tree

[Simon Glass]

Hi Masahiro,

On Thu, 30 Nov 2023 at 08:39, Masahiro Yamada <masahiroy at kernel.org> wrote:
>
> On Thu, Nov 30, 2023 at 2:22 AM Simon Glass <sjg at chromium.org> wrote:
> >
> > Add a script which produces a Flat Image Tree (FIT), a single file
> > containing the built kernel and associated devicetree files.
> > Compression defaults to gzip which gives a good balance of size and
> > performance.
> >
> > The files compress from about 86MB to 24MB using this approach.
> >
> > The FIT can be used by bootloaders which support it, such as U-Boot
> > and Linuxboot. It permits automatic selection of the correct
> > devicetree, matching the compatible string of the running board with
> > the closest compatible string in the FIT. There is no need for
> > filenames or other workarounds.
> >
> > Add a 'make image.fit' build target for arm64, as well.
> >
> > The FIT can be examined using 'dumpimage -l'.
> >
> > This features requires pylibfdt (use 'pip install libfdt'). It also
> > requires compression utilities for the algorithm being used. Supported
> > compression options are the same as the Image.xxx files. For now there
> > is no way to change the compression other than by editing the rule for
> > $(obj)/image.fit
> >
> > While FIT supports a ramdisk / initrd, no attempt is made to support
> > this here, since it must be built separately from the Linux build.
> >
> > Signed-off-by: Simon Glass <sjg at chromium.org>
> > ---
> >
> > Changes in v7:
> > - Add Image as a dependency of image.fit
> > - Drop kbuild tag
> > - Add dependency on dtbs
> > - Drop unnecessary path separator for dtbs
> > - Rebase to -next
> >
> > Changes in v5:
> > - Drop patch previously applied
> > - Correct compression rule which was broken in v4
> >
> > Changes in v4:
> > - Use single quotes for UIMAGE_NAME
> >
> > Changes in v3:
> > - Drop temporary file image.itk
> > - Drop patch 'Use double quotes for image name'
> > - Drop double quotes in use of UIMAGE_NAME
> > - Drop unnecessary CONFIG_EFI_ZBOOT condition for help
> > - Avoid hard-coding "arm64" for the DT architecture
> >
> > Changes in v2:
> > - Drop patch previously applied
> > - Add .gitignore file
> > - Move fit rule to Makefile.lib using an intermediate file
> > - Drop dependency on CONFIG_EFI_ZBOOT
> > - Pick up .dtb files separately from the kernel
> > - Correct pylint too-many-args warning for write_kernel()
> > - Include the kernel image in the file count
> > - Add a pointer to the FIT spec and mention of its wide industry usage
> > - Mention the kernel version in the FIT description
> >
> >  MAINTAINERS                |   7 +
> >  arch/arm64/Makefile        |   9 +-
> >  arch/arm64/boot/.gitignore |   1 +
> >  arch/arm64/boot/Makefile   |   6 +-
> >  scripts/Makefile.lib       |  13 ++
> >  scripts/make_fit.py        | 289 +++++++++++++++++++++++++++++++++++++
> >  6 files changed, 322 insertions(+), 3 deletions(-)
> >  create mode 100755 scripts/make_fit.py
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 14587be87a33..d609f0e8deb3 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1585,6 +1585,13 @@ F:       Documentation/process/maintainer-soc*.rst
> >  F:     arch/arm/boot/dts/Makefile
> >  F:     arch/arm64/boot/dts/Makefile
> >
> > +ARM64 FIT SUPPORT
> > +M:     Simon Glass <sjg at chromium.org>
> > +L:     linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
> > +S:     Maintained
> > +F:     arch/arm64/boot/Makefile
> > +F:     scripts/make_fit.py
> > +
> >  ARM ARCHITECTED TIMER DRIVER
> >  M:     Mark Rutland <mark.rutland at arm.com>
> >  M:     Marc Zyngier <maz at kernel.org>
> > diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
> > index 1bd4fae6e806..18e092de7cdb 100644
> > --- a/arch/arm64/Makefile
> > +++ b/arch/arm64/Makefile
> > @@ -36,6 +36,8 @@ ifeq ($(CONFIG_BROKEN_GAS_INST),y)
> >  $(warning Detected assembler with broken .inst; disassembly will be unreliable)
> >  endif
> >
> > +KBUILD_DTBS      := dtbs
>
>
> Please remove this, and hard-code
>
>  image.fit: dtbs

OK

>
>
>
> >
> >  $(obj)/Image: vmlinux FORCE
> >         $(call if_changed,objcopy)
> > @@ -39,6 +40,9 @@ $(obj)/Image.lzo: $(obj)/Image FORCE
> >  $(obj)/Image.zst: $(obj)/Image FORCE
> >         $(call if_changed,zstd)
> >
> > +$(obj)/image.fit: $(obj)/Image FORCE
> > +       $(call cmd,fit,gzip)
>
>
> The gzip parameter is not used.
> Please do
>
>      $(call cmd,fit)

I do want to be able to control the compression algo. I added a
FIT_COMPRESS for that, so that this arg is used.
>
> In the python script, functions are separated with two blank lines,
> but there is only one blank line between parse_args() and setup_fit().
>
>
> I do not mind either way because it does not contain any class,
> but please keep consistency.

OK

Regards,
Simon