[PATCH V2 0/2] ARM: dts: bcm2711: Add generic xHCI

[Stefan Wahren]

In contrast to the Raspberry Pi 4, the Compute Module 4 or the IO board
does not have a VL805 USB 3.0 host controller, which is connected via
PCIe. Instead, the BCM2711 on the Compute Module provides the built-in
xHCI.

Changes in V2:
- adjust xHCI compatible as suggested by Justin & Florian
- keep xHCI disabled in order to let the bootloader decide which
  USB block should be enabled, which result in a drop of patch 3

Stefan Wahren (2):
  dt-bindings: usb: xhci: Add optional power-domains
  ARM: dts: bcm2711: Add generic xHCI

 .../devicetree/bindings/usb/generic-xhci.yaml      |  3 +++
 arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi        |  5 +++++
 arch/arm/boot/dts/broadcom/bcm2711.dtsi            | 14 ++++++++++++++
 3 files changed, 22 insertions(+)

--
2.34.1