[PATCH v10 3/3] tty: samsung_tty: 32-bit access for TX/RX hold registers
Youngmin Nam
youngmin.nam at samsung.com
Thu Nov 30 03:20:33 PST 2023
On Thu, Nov 30, 2023 at 10:19:40AM +0000, Tudor Ambarus wrote:
> I'm trying my luck on a 3 year old patch, fingers crossed :).
>
> On 5/6/20 09:02, Hyunki Koo wrote:
>
> Hi, Hyunki!
>
> > Support 32-bit access for the TX/RX hold registers UTXH and URXH.
> >
> > This is required for some newer SoCs.
>
> Is the 32-bit access mandatory for the newer SoCs? I'm asking because I
> see a SError Interrupt when using 8-bit accesses on gs101 (pixel6). Can
> you confirm if gs101 USI UART is restricted to only 32 bit data width
> accesses?
>
> If 32-bit accesses are mandatory, we should impose this restriction so
> that we avoid crashing the kernel on wrong user configuration. I have
> some patches ready, waiting just for a confirmation.
Hi.
Yes, some newer exynos SoCs allow only 32bit access to UART TX / RX register.
This feature is related with SoC Bus architecture so it should be controlled by "reg-io-width" in
UART device tree.
Thanks.
>
> Below is the crash that I see. Thanks!
>
> [ 1.215459] SError Interrupt on CPU6, code 0x00000000be000411 -- SError
> [ 1.215464] CPU: 6 PID: 1 Comm: swapper/0 Not tainted
> 6.6.0-rc1-00021-g31831088e862-dirty #88
> [ 1.215468] Hardware name: Oriole DVT (DT)
> [ 1.215470] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS
> BTYPE=--)
> [ 1.215473] pc : s3c24xx_serial_console_putchar+0x1c/0x90
> [ 1.215487] lr : uart_console_write+0x50/0x6c
> [ 1.215491] sp : ffff80008007b6c0
> [ 1.215492] x29: ffff80008007b6c0 x28: 0000000000000000 x27:
> ffffc0ec2c855900
> [ 1.215498] x26: ffffc0ec2bdee008 x25: 0000000000000000 x24:
> ffffc0ec2c529a40
> [ 1.215501] x23: ffff80008007b830 x22: ffffc0ec2c9578b9 x21:
> ffffc0ec2c9b8330
> [ 1.215504] x20: ffffc0ec2aa0d684 x19: ffffc0ec2c95788a x18:
> 0000000000000006
> [ 1.215507] x17: 0000000000000000 x16: 0000000000000001 x15:
> ffff80008007b460
> [ 1.215510] x14: 0000000000000000 x13: 64656c62616e6520 x12:
> 5d30434153797474
> [ 1.215513] x11: 5b20656c6f736e6f x10: 63203a6b746e6972 x9 :
> 656c62616e65205d
> [ 1.215515] x8 : 304341537974745b x7 : 205d303534353132 x6 :
> 322e31202020205b
> [ 1.215518] x5 : ffffc0ec2c9b82f0 x4 : ffffc0ec2b5bc1c0 x3 :
> ffff800080061000
> [ 1.215521] x2 : 0000000000000111 x1 : 0000000000000020 x0 :
> ffffc0ec2c9b8330
> [ 1.215526] Kernel panic - not syncing: Asynchronous SError Interrupt
> [ 1.215528] CPU: 6 PID: 1 Comm: swapper/0 Not tainted
> 6.6.0-rc1-00021-g31831088e862-dirty #88
> [ 1.215531] Hardware name: Oriole DVT (DT)
> [ 1.215532] Call trace:
> [ 1.215533] dump_backtrace+0x90/0xe8
> [ 1.215542] show_stack+0x18/0x24
> [ 1.215547] dump_stack_lvl+0x48/0x60
> [ 1.215555] dump_stack+0x18/0x24
> [ 1.215559] panic+0x31c/0x378
> [ 1.215565] nmi_panic+0x8c/0x90
> [ 1.215569] arm64_serror_panic+0x6c/0x78
> [ 1.215571] do_serror+0x3c/0x70
> [ 1.215574] el1h_64_error_handler+0x30/0x48
> [ 1.215581] el1h_64_error+0x64/0x68
> [ 1.215583] s3c24xx_serial_console_putchar+0x1c/0x90
> [ 1.215588] s3c24xx_serial_console_write+0xb8/0xfc
> [ 1.215593] console_flush_all.isra.0+0x168/0x3ac
> [ 1.215600] console_unlock+0x58/0xdc
> [ 1.215604] vprintk_emit+0x1a8/0x2b0
> [ 1.215608] vprintk_default+0x38/0x44
> [ 1.215613] vprintk+0xbc/0xd0
> [ 1.215617] _printk+0x5c/0x84
> [ 1.215621] register_console+0x2a0/0x400
> [ 1.215625] serial_core_register_port+0x61c/0x658
> [ 1.215630] serial_ctrl_register_port+0x10/0x1c
> [ 1.215634] uart_add_one_port+0x10/0x1c
> [ 1.215639] s3c24xx_serial_probe+0x360/0x6fc
> [ 1.215644] platform_probe+0x68/0xc8
> [ 1.215650] really_probe+0x148/0x2b0
> [ 1.215653] __driver_probe_device+0x78/0x12c
> [ 1.215656] driver_probe_device+0x3c/0x15c
> [ 1.215658] __driver_attach+0x90/0x19c
> [ 1.215661] bus_for_each_dev+0x78/0xd4
> [ 1.215668] driver_attach+0x24/0x30
> [ 1.215670] bus_add_driver+0xe8/0x1f8
> [ 1.215672] driver_register+0x5c/0x124
> [ 1.215675] __platform_driver_register+0x28/0x34
> [ 1.215678] samsung_serial_init+0x30/0x8c
> [ 1.215687] do_one_initcall+0x7c/0x1c0
> [ 1.215689] kernel_init_freeable+0x1bc/0x284
> [ 1.215695] kernel_init+0x24/0x1dc
> [ 1.215697] ret_from_fork+0x10/0x20
> [ 1.215701] SMP: stopping secondary CPUs
> [ 1.215708] Kernel Offset: 0x40ebaa200000 from 0xffff800080000000
> [ 1.215710] PHYS_OFFSET: 0xffffc18980000000
> [ 1.215711] CPU features: 0xc0000001,70020143,1000720b
> [ 1.215714] Memory Limit: none
> >
> > Signed-off-by: Hyunki Koo <hyunki00.koo at samsung.com>
> > Reviewed-by: Krzysztof Kozlowski <krzk at kernel.org>
> > Tested on Odroid HC1 (Exynos5422):
> > Tested-by: Krzysztof Kozlowski <krzk at kernel.org>
> > ---
> > drivers/tty/serial/samsung_tty.c | 62 ++++++++++++++++++++++++++++++++++++----
> > 1 file changed, 57 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> > index 326b0164609c..6ef614d8648c 100644
> > --- a/drivers/tty/serial/samsung_tty.c
> > +++ b/drivers/tty/serial/samsung_tty.c
> > @@ -154,10 +154,33 @@ struct s3c24xx_uart_port {
> > #define portaddrl(port, reg) \
> > ((unsigned long *)(unsigned long)((port)->membase + (reg)))
> >
> > -#define rd_reg(port, reg) (readb_relaxed(portaddr(port, reg)))
> > +static u32 rd_reg(struct uart_port *port, u32 reg)
> > +{
> > + switch (port->iotype) {
> > + case UPIO_MEM:
> > + return readb_relaxed(portaddr(port, reg));
> > + case UPIO_MEM32:
> > + return readl_relaxed(portaddr(port, reg));
> > + default:
> > + return 0;
> > + }
> > + return 0;
> > +}
> > +
> > #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
> >
> > -#define wr_reg(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
> > +static void wr_reg(struct uart_port *port, u32 reg, u32 val)
> > +{
> > + switch (port->iotype) {
> > + case UPIO_MEM:
> > + writeb_relaxed(val, portaddr(port, reg));
> > + break;
> > + case UPIO_MEM32:
> > + writel_relaxed(val, portaddr(port, reg));
> > + break;
> > + }
> > +}
> > +
> > #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
> >
> > /* Byte-order aware bit setting/clearing functions. */
> > @@ -1974,7 +1997,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
> > struct device_node *np = pdev->dev.of_node;
> > struct s3c24xx_uart_port *ourport;
> > int index = probe_index;
> > - int ret;
> > + int ret, prop = 0;
> >
> > if (np) {
> > ret = of_alias_get_id(np, "serial");
> > @@ -2000,10 +2023,27 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
> > dev_get_platdata(&pdev->dev) :
> > ourport->drv_data->def_cfg;
> >
> > - if (np)
> > + if (np) {
> > of_property_read_u32(np,
> > "samsung,uart-fifosize", &ourport->port.fifosize);
> >
> > + if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
> > + switch (prop) {
> > + case 1:
> > + ourport->port.iotype = UPIO_MEM;
> > + break;
> > + case 4:
> > + ourport->port.iotype = UPIO_MEM32;
> > + break;
> > + default:
> > + dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
> > + prop);
> > + ret = -EINVAL;
> > + break;
> > + }
> > + }
> > + }
> > +
> > if (ourport->drv_data->fifosize[index])
> > ourport->port.fifosize = ourport->drv_data->fifosize[index];
> > else if (ourport->info->fifosize)
> > @@ -2587,6 +2627,18 @@ module_platform_driver(samsung_serial_driver);
> > * Early console.
> > */
> >
> > +static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
> > +{
> > + switch (port->iotype) {
> > + case UPIO_MEM:
> > + writeb(val, portaddr(port, reg));
> > + break;
> > + case UPIO_MEM32:
> > + writel(val, portaddr(port, reg));
> > + break;
> > + }
> > +}
> > +
> > struct samsung_early_console_data {
> > u32 txfull_mask;
> > };
> > @@ -2612,7 +2664,7 @@ static void samsung_early_putc(struct uart_port *port, int c)
> > else
> > samsung_early_busyuart(port);
> >
> > - writeb(c, port->membase + S3C2410_UTXH);
> > + wr_reg_barrier(port, S3C2410_UTXH, c);
> > }
> >
> > static void samsung_early_write(struct console *con, const char *s,
>
>
More information about the linux-arm-kernel
mailing list