[PATCH] arm64: dts: xilinx: Apply overlays to base dtbs

[Michal Simek]

On 11/29/23 17:13, Rob Herring wrote:
> On Mon, Sep 18, 2023 at 5:56 AM Michal Simek <michal.simek at amd.com> wrote:
>>
>>
>>
>> On 9/11/23 23:47, Rob Herring wrote:
>>> DT overlays in tree need to be applied to a base DTB to validate they
>>> apply, to run schema checks on them, and to catch any errors at compile
>>> time. Defining the "-dtbs" variable is not enough as the combined DT must
>>> be added to dtbs-y.
>>>
>>> zynqmp-sck-kr-g-revA.dtso and zynqmp-sck-kr-g-revB.dtso don't exist, so drop
>>> them.
>>>
>>> Signed-off-by: Rob Herring <robh at kernel.org>
>>> ---
>>>    arch/arm64/boot/dts/xilinx/Makefile | 9 ++++-----
>>>    1 file changed, 4 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
>>> index 5e40c0b4fa0a..1068b0fa8e98 100644
>>> --- a/arch/arm64/boot/dts/xilinx/Makefile
>>> +++ b/arch/arm64/boot/dts/xilinx/Makefile
>>> @@ -22,11 +22,10 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb
>>>    dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb
>>>
>>>    zynqmp-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
>>> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revA.dtb
>>>    zynqmp-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
>>> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revB.dtb
>>>    zynqmp-smk-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
>>> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revA.dtb
>>>    zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
>>> -
>>> -zynqmp-sm-k26-revA-sck-kr-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
>>> -zynqmp-sm-k26-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
>>> -zynqmp-smk-k26-revA-sck-kr-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
>>> -zynqmp-smk-k26-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
>>> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb
>>
>> Applied.
> 
> Why is this in next still, but not in Linus' tree?

I was OOO and didn't send pull request to Arnd. I will do it for 6.8. It means 
in 2-3 weeks from now.

Thanks,
Michal