[PATCH v3 00/12] RB1/QCM2290 features

[Konrad Dybcio]

This series brings:
- interconnect plumbing
- display setup

for QCM2290/QRB2210 and

- CAN bus controller
- HDMI display
- wifi fw variant name

for QTI RB1

and the necessary bindings changes

Patch 1-2 is for Dmitry/freedreno
Patch 3 for Georgi/icc
Patch 5 for Will/iommu
the rest are for Bjorn/qcom

Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
---
Changes in v3:
- Pick up tags
- Fix commit msg of "iommu/arm-smmu-qcom: Add QCM2290.."
- Add missing sob ("qrb2210-rb1: add wifi variant property")
- Link to v2: https://lore.kernel.org/r/20231125-topic-rb1_feat-v2-0-979b28f35e4a@linaro.org

Changes in v2:
- Fix up the bindings example in "qcm2290-mdss: Use the non-deprecated DSI compat" (krzk)
- Fix up sc7180 & sc7280 DTs as a result of the bindings changes
- Pick up rbs where it makes sense
- Link to v1: https://lore.kernel.org/r/20231125-topic-rb1_feat-v1-0-11d71b12b058@linaro.org

---
Dmitry Baryshkov (1):
      arm64: dts: qcom: qrb2210-rb1: add wifi variant property

Konrad Dybcio (11):
      dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat
      dt-bindings: display: msm: Add reg bus and rotator interconnects
      dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance
      dt-bindings: firmware: qcom,scm: Allow interconnect for everyone
      iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
      arm64: dts: qcom: sc7180: Add the missing MDSS icc path
      arm64: dts: qcom: sc7280: Add the missing MDSS icc path
      arm64: dts: qcom: qcm2290: Add display nodes
      arm64: dts: qcom: qcm2290: Hook up interconnects
      arm64: dts: qcom: qrb2210-rb1: Set up HDMI
      arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller

 .../bindings/display/msm/mdss-common.yaml          |  18 +-
 .../bindings/display/msm/qcom,qcm2290-mdss.yaml    |  21 +-
 .../bindings/display/msm/qcom,sc7180-mdss.yaml     |  14 +-
 .../bindings/display/msm/qcom,sc7280-mdss.yaml     |  14 +-
 .../bindings/display/msm/qcom,sm6115-mdss.yaml     |  10 +
 .../bindings/display/msm/qcom,sm6125-mdss.yaml     |   8 +-
 .../bindings/display/msm/qcom,sm6350-mdss.yaml     |   8 +-
 .../bindings/display/msm/qcom,sm6375-mdss.yaml     |   8 +-
 .../bindings/display/msm/qcom,sm8450-mdss.yaml     |  13 +-
 .../devicetree/bindings/firmware/qcom,scm.yaml     |  15 -
 .../bindings/interconnect/qcom,msm8998-bwmon.yaml  |   1 +
 arch/arm64/boot/dts/qcom/qcm2290.dtsi              | 462 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qrb2210-rb1.dts           | 109 +++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |   8 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |   9 +-
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c         |   1 +
 16 files changed, 671 insertions(+), 48 deletions(-)
---
base-commit: 1f5c003694fab4b1ba6cbdcc417488b975c088d0
change-id: 20231125-topic-rb1_feat-dd510532621b

Best regards,
-- 
Konrad Dybcio <konrad.dybcio at linaro.org>