[PATCH 2/3] arm64: dts: imx8mm: Add optional overdrive DTSI

[Adam Ford]

For boards who run their SoC at a higher voltage than nominal,
the boards can run several clocks at an overdrive rate for
better performance.  Add an optional DTSI file which can be
included by various boards to run in overdrive mode.

This raises the GPU PLL to 1000MHz, and the VPU PLL to
700MHz while moving VPU_G1 and VPU_H1 to the SYS_PLL3_OUT
which runs at 750MHz.

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
new file mode 100644
index 000000000000..b31436b5e9b7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu_2d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&gpu_3d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&vpu_blk_ctrl {
+	assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+			  <&clk IMX8MM_CLK_VPU_G2>,
+			  <&clk IMX8MM_CLK_VPU_H1>,
+			  <&clk IMX8MM_VPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
+				 <&clk IMX8MM_VPU_PLL_OUT>,
+				 <&clk IMX8MM_SYS_PLL3_OUT>;
+	assigned-clock-rates = <750000000>,
+			       <700000000>,
+			       <750000000>,
+			       <700000000>;
+};
-- 
2.40.1