[PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host

[Cyril Brulebois]

Hi Stefan,

Stefan Wahren <wahrenst at gmx.net> (2023-11-27):
> can you please check what happens if you add the following to
> config.txt:
> 
> [cm4]
> otg_mode=1

I've only rebooted a few times but the system seems to be booting fine
once this setting is added to config.txt.

Writing stuff to a USB stick with or without the patches seems to give
similar performances: ~ 18 MB/s after 3 minutes of copying /dev/null to
/dev/sda with a 32M block size; similar CPU usage for dd, usb-storage,
and the relevant kworker thread.


Cheers,
-- 
Cyril Brulebois (kibi at debian.org)            <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20231127/0d7b2beb/attachment.sig>