[PATCH v2 07/12] arm64: dts: qcom: sc7280: Add the missing MDSS icc path

[Konrad Dybcio]

MDSS, aside from the MDP-MEM path, also requires the CPU-DISP_CFG one.
Failing to provide it may result in register accesses failing and that's
never good.

Add the missing path.

Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 04bf85b0399a..41d327b1f1b6 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -3958,8 +3959,12 @@ mdss: display-subsystem at ae00000 {
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x900 0x402>;
 

-- 
2.43.0