[PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host

[Cyril Brulebois]

Stefan Wahren <wahrenst at gmx.net> (2023-11-27):
> Could you please provide the following information:
> 
> - settings of config.txt

Here you go:

    arm_64bit=1
    enable_uart=1
    upstream_kernel=1
    
    kernel=vmlinuz-6.6.0+
    initramfs initrd.img-6.6.0+
    
    enable_jtag_gpio=1
    force_turbo=1

> - VC firmware version

This is pieeprom-2023-01-11.bin

I know there's pieeprom-2023-05-11.bin as well, but I've been keeping
the former as a constant throughout the PCIe patch series testing once
I realized how critical it was (old beta EEPROM versions found in some
CM4s made everything much harder initially).

In case the config matters:

    [all]
    BOOT_UART=0
    WAKE_ON_GPIO=1
    POWER_OFF_ON_HALT=0
    BOOT_ORDER=0xf25641
    ENABLE_SELF_UPDATE=1

> - did you use arm64/defconfig or something special?

I'm using a “distribution config”, starting from the latest arm64 config
found in Debian unstable (6.5.10-1), and applying `make oldconfig`.

You'll find it attached.


Cheers,
-- 
Cyril Brulebois (kibi at debian.org)            <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config-6.6.0+.gz
Type: application/gzip
Size: 70408 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20231127/0b657ef3/attachment-0001.gz>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20231127/0b657ef3/attachment-0001.sig>