[PATCH 7/9] arm64: dts: mediatek: Introduce MT8186 Steelix

[Chen-Yu Tsai]

On Mon, Oct 16, 2023 at 4:36 PM Eugen Hristev
<eugen.hristev at collabora.com> wrote:
>
> On 10/13/23 02:02, Chen-Yu Tsai wrote:
> > The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4,
> > is a convertible device based on a common design of the same name. The
> > device comes in different variants. Of them, whether a world facing
> > camera is integrated is the only differentiating factor between the
> > two device trees added. The different SKU IDs describe this alone.
> >
> > The other device difference is the touchpad component used. This is
> > simply handled by having both possible components described in the
> > device tree, and letting the implementation figure out which one is
> > actually available. The system bootloader / firmware does not
> > differentiate this in that they share the same SKU IDs.
> >
> > Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> > ---
> >   arch/arm64/boot/dts/mediatek/Makefile         |   2 +
> >   .../mt8186-corsola-steelix-sku131072.dts      |  18 ++
> >   .../mt8186-corsola-steelix-sku131073.dts      |  18 ++
> >   .../dts/mediatek/mt8186-corsola-steelix.dtsi  | 197 ++++++++++++++++++
> >   4 files changed, 235 insertions(+)
> >   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
> >   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
> >   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
> >

[...]

> > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
> > new file mode 100644
> > index 000000000000..8488f2f9dc4d
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
> > @@ -0,0 +1,197 @@

[...]

> > +&i2c2 {
> > +     i2c-scl-internal-delay-ns = <22000>;
> > +
> > +     /* second source component */
> > +     touchpad at 2c {
> > +             compatible = "hid-over-i2c";
> > +             reg = <0x2c>;
> > +             hid-descr-addr = <0x20>;
> > +             interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> > +             pinctrl-names = "default";
> > +             pinctrl-0 = <&trackpad_pin>;
> > +             vdd-supply = <&pp3300_s3>;
> > +             wakeup-source;
> > +     };
>
> Hi Chen-Yu,
>
> This is not okay, the `trackpad_pin` is shared with touchpad at 15 , and if
> drivers are probed in parallel , this can lead to a conflict on this pin
> (GPIO11)

You're right. I've moved it under i2c2 for now, as we do for other platforms
with second source components.

This should hopefully be cleaned up once we have a hardware prober.

ChenYu