[PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host

[Stefan Wahren]

In contrast to the Raspberry Pi 4, the Compute Module 4 or the IO board
does not have a VL805 USB 3.0 host controller, which is connected via
PCIe. Instead, the BCM2711 on the Compute Module provides the built-in
xHCI.

Stefan Wahren (3):
  dt-bindings: usb: xhci: Add optional power-domains
  ARM: dts: bcm2711: Add generic xHCI
  ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host

 Documentation/devicetree/bindings/usb/generic-xhci.yaml | 3 +++
 arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts       | 9 ++++++++-
 arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi             | 5 +++++
 arch/arm/boot/dts/broadcom/bcm2711.dtsi                 | 9 +++++++++
 4 files changed, 25 insertions(+), 1 deletion(-)

--
2.34.1