[PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support

[Peter Griffin]

Hi Krzysztof,


On Thu, 12 Oct 2023 at 07:44, Krzysztof Kozlowski
<krzysztof.kozlowski at linaro.org> wrote:
>
> On 11/10/2023 20:48, Peter Griffin wrote:
> > Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6,
> > (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile
> > phones. It features:
> > * 4xA55 little cluster
> > * 2xA76 Mid cluster
> > * 2xX1 Big cluster
> >
>
> ...
>
> > +     gpa10: gpa10-gpio-bank  {
> > +             gpio-controller;
> > +             #gpio-cells = <2>;
> > +             interrupt-controller;
> > +             #interrupt-cells = <2>;
> > +             interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
> > +                        <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> > +     };
> > +
> > +     uart15_bus: uart15-bus-pins {
> > +            samsung,pins = "gpa2-3", "gpa2-4";
> > +            samsung,pin-function = <2>;
>
> GS101_PIN_FUNC_2

will fix
>
> > +            samsung,pin-pud = <0>;
>
> GS101_PIN_PULL_NONE

will fix

>
> > +     };
> > +
> > +     uart16_bus: uart16-bus-pins {
> > +            samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
> > +            samsung,pin-function = <GS101_PIN_FUNC_2>;
> > +            samsung,pin-pud = <GS101_PIN_PULL_NONE>;
>
> But here it is correct...
>
> > +     };
> > +
> > +     uart16_bus_rts: uart1-bus-rts-pins {
> > +             samsung,pins = "gpa3-2";
> > +             samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> > +             samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> > +             samsung,pin-val = <1>;
>
> Why do you set UART RTS pin value?

It's a remnant from the downstream drivers that support rts-gpio control.
I will remove the samsung,pin-val = <1> in the next version.

Thanks,

Peter