[PATCH v1 1/3] KVM: selftests: aarch64: Make the [create|destroy]_vpmu_vm() can be reused

Eric Auger eauger at redhat.com
Fri Nov 24 10:14:43 PST 2023


Hi Shaoqin,

On 11/23/23 07:37, Shaoqin Huang wrote:
> Move the [create|destroy]_vpmu_vm() into the lib/, which makes those
some wording suggestions below:

Move the implementation of .. into lib/aarch64/pmu.c and export their
declaration in a header so that they can be reused by other tests. Also
the title may be renamed: Make [create|destroy]_vpmu_vm() public
> function can be used by other tests. Install the handler is specific to
the sync exception handler install is test specific so we move it out of
the helper function.
> the vpmu_counter_access test, so create a wrapper function for it, and
> only move the common part.
> 
> No functional change.
intended ;-)
> 
> Signed-off-by: Shaoqin Huang <shahuang at redhat.com>
> ---
>  tools/testing/selftests/kvm/Makefile          |   1 +
>  .../kvm/aarch64/vpmu_counter_access.c         | 100 +++++-------------
>  .../selftests/kvm/include/aarch64/vpmu.h      |  16 +++
>  .../testing/selftests/kvm/lib/aarch64/vpmu.c  |  64 +++++++++++
>  4 files changed, 105 insertions(+), 76 deletions(-)
>  create mode 100644 tools/testing/selftests/kvm/include/aarch64/vpmu.h
>  create mode 100644 tools/testing/selftests/kvm/lib/aarch64/vpmu.c
> 
> diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile
> index a5963ab9215b..b60852c222ac 100644
> --- a/tools/testing/selftests/kvm/Makefile
> +++ b/tools/testing/selftests/kvm/Makefile
> @@ -57,6 +57,7 @@ LIBKVM_aarch64 += lib/aarch64/processor.c
>  LIBKVM_aarch64 += lib/aarch64/spinlock.c
>  LIBKVM_aarch64 += lib/aarch64/ucall.c
>  LIBKVM_aarch64 += lib/aarch64/vgic.c
> +LIBKVM_aarch64 += lib/aarch64/vpmu.c
>  
>  LIBKVM_s390x += lib/s390x/diag318_test_handler.c
>  LIBKVM_s390x += lib/s390x/processor.c
> diff --git a/tools/testing/selftests/kvm/aarch64/vpmu_counter_access.c b/tools/testing/selftests/kvm/aarch64/vpmu_counter_access.c
> index 5ea78986e665..17305408a334 100644
> --- a/tools/testing/selftests/kvm/aarch64/vpmu_counter_access.c
> +++ b/tools/testing/selftests/kvm/aarch64/vpmu_counter_access.c
> @@ -16,6 +16,7 @@
>  #include <processor.h>
>  #include <test_util.h>
>  #include <vgic.h>
> +#include <vpmu.h>
>  #include <perf/arm_pmuv3.h>
>  #include <linux/bitfield.h>
>  
> @@ -25,13 +26,7 @@
>  /* The cycle counter bit position that's common among the PMU registers */
>  #define ARMV8_PMU_CYCLE_IDX		31
>  
> -struct vpmu_vm {
> -	struct kvm_vm *vm;
> -	struct kvm_vcpu *vcpu;
> -	int gic_fd;
> -};
> -
> -static struct vpmu_vm vpmu_vm;
> +static struct vpmu_vm *vpmu_vm;
>  
>  struct pmreg_sets {
>  	uint64_t set_reg_id;
> @@ -421,64 +416,6 @@ static void guest_code(uint64_t expected_pmcr_n)
>  	GUEST_DONE();
>  }
>  
> -#define GICD_BASE_GPA	0x8000000ULL
> -#define GICR_BASE_GPA	0x80A0000ULL
> -
> -/* Create a VM that has one vCPU with PMUv3 configured. */
> -static void create_vpmu_vm(void *guest_code)
> -{
> -	struct kvm_vcpu_init init;
> -	uint8_t pmuver, ec;
> -	uint64_t dfr0, irq = 23;
> -	struct kvm_device_attr irq_attr = {
> -		.group = KVM_ARM_VCPU_PMU_V3_CTRL,
> -		.attr = KVM_ARM_VCPU_PMU_V3_IRQ,
> -		.addr = (uint64_t)&irq,
> -	};
> -	struct kvm_device_attr init_attr = {
> -		.group = KVM_ARM_VCPU_PMU_V3_CTRL,
> -		.attr = KVM_ARM_VCPU_PMU_V3_INIT,
> -	};
> -
> -	/* The test creates the vpmu_vm multiple times. Ensure a clean state */
> -	memset(&vpmu_vm, 0, sizeof(vpmu_vm));
> -
> -	vpmu_vm.vm = vm_create(1);
> -	vm_init_descriptor_tables(vpmu_vm.vm);
> -	for (ec = 0; ec < ESR_EC_NUM; ec++) {
> -		vm_install_sync_handler(vpmu_vm.vm, VECTOR_SYNC_CURRENT, ec,
> -					guest_sync_handler);
> -	}
> -
> -	/* Create vCPU with PMUv3 */
> -	vm_ioctl(vpmu_vm.vm, KVM_ARM_PREFERRED_TARGET, &init);
> -	init.features[0] |= (1 << KVM_ARM_VCPU_PMU_V3);
> -	vpmu_vm.vcpu = aarch64_vcpu_add(vpmu_vm.vm, 0, &init, guest_code);
> -	vcpu_init_descriptor_tables(vpmu_vm.vcpu);
> -	vpmu_vm.gic_fd = vgic_v3_setup(vpmu_vm.vm, 1, 64,
> -					GICD_BASE_GPA, GICR_BASE_GPA);
> -	__TEST_REQUIRE(vpmu_vm.gic_fd >= 0,
> -		       "Failed to create vgic-v3, skipping");
> -
> -	/* Make sure that PMUv3 support is indicated in the ID register */
> -	vcpu_get_reg(vpmu_vm.vcpu,
> -		     KVM_ARM64_SYS_REG(SYS_ID_AA64DFR0_EL1), &dfr0);
> -	pmuver = FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), dfr0);
> -	TEST_ASSERT(pmuver != ID_AA64DFR0_EL1_PMUVer_IMP_DEF &&
> -		    pmuver >= ID_AA64DFR0_EL1_PMUVer_IMP,
> -		    "Unexpected PMUVER (0x%x) on the vCPU with PMUv3", pmuver);
> -
> -	/* Initialize vPMU */
> -	vcpu_ioctl(vpmu_vm.vcpu, KVM_SET_DEVICE_ATTR, &irq_attr);
> -	vcpu_ioctl(vpmu_vm.vcpu, KVM_SET_DEVICE_ATTR, &init_attr);
> -}
> -
> -static void destroy_vpmu_vm(void)
> -{
> -	close(vpmu_vm.gic_fd);
> -	kvm_vm_free(vpmu_vm.vm);
> -}
> -
>  static void run_vcpu(struct kvm_vcpu *vcpu, uint64_t pmcr_n)
>  {
>  	struct ucall uc;
> @@ -497,13 +434,24 @@ static void run_vcpu(struct kvm_vcpu *vcpu, uint64_t pmcr_n)
>  	}
>  }
>  
> +static void create_vpmu_vm_with_handler(void *guest_code)
> +{
> +	uint8_t ec;
> +	vpmu_vm = create_vpmu_vm(guest_code);
> +
> +	for (ec = 0; ec < ESR_EC_NUM; ec++) {
> +		vm_install_sync_handler(vpmu_vm->vm, VECTOR_SYNC_CURRENT, ec,
> +					guest_sync_handler);
> +	}
> +}
> +
>  static void test_create_vpmu_vm_with_pmcr_n(uint64_t pmcr_n, bool expect_fail)
>  {
>  	struct kvm_vcpu *vcpu;
>  	uint64_t pmcr, pmcr_orig;
>  
> -	create_vpmu_vm(guest_code);
> -	vcpu = vpmu_vm.vcpu;
> +	create_vpmu_vm_with_handler(guest_code);
> +	vcpu = vpmu_vm->vcpu;
>  
>  	vcpu_get_reg(vcpu, KVM_ARM64_SYS_REG(SYS_PMCR_EL0), &pmcr_orig);
>  	pmcr = pmcr_orig;
> @@ -539,7 +487,7 @@ static void run_access_test(uint64_t pmcr_n)
>  	pr_debug("Test with pmcr_n %lu\n", pmcr_n);
>  
>  	test_create_vpmu_vm_with_pmcr_n(pmcr_n, false);
> -	vcpu = vpmu_vm.vcpu;
> +	vcpu = vpmu_vm->vcpu;
>  
>  	/* Save the initial sp to restore them later to run the guest again */
>  	vcpu_get_reg(vcpu, ARM64_CORE_REG(sp_el1), &sp);
> @@ -550,7 +498,7 @@ static void run_access_test(uint64_t pmcr_n)
>  	 * Reset and re-initialize the vCPU, and run the guest code again to
>  	 * check if PMCR_EL0.N is preserved.
>  	 */
> -	vm_ioctl(vpmu_vm.vm, KVM_ARM_PREFERRED_TARGET, &init);
> +	vm_ioctl(vpmu_vm->vm, KVM_ARM_PREFERRED_TARGET, &init);
>  	init.features[0] |= (1 << KVM_ARM_VCPU_PMU_V3);
>  	aarch64_vcpu_setup(vcpu, &init);
>  	vcpu_init_descriptor_tables(vcpu);
> @@ -559,7 +507,7 @@ static void run_access_test(uint64_t pmcr_n)
>  
>  	run_vcpu(vcpu, pmcr_n);
>  
> -	destroy_vpmu_vm();
> +	destroy_vpmu_vm(vpmu_vm);
>  }
>  
>  static struct pmreg_sets validity_check_reg_sets[] = {
> @@ -580,7 +528,7 @@ static void run_pmregs_validity_test(uint64_t pmcr_n)
>  	uint64_t valid_counters_mask, max_counters_mask;
>  
>  	test_create_vpmu_vm_with_pmcr_n(pmcr_n, false);
> -	vcpu = vpmu_vm.vcpu;
> +	vcpu = vpmu_vm->vcpu;
>  
>  	valid_counters_mask = get_counters_mask(pmcr_n);
>  	max_counters_mask = get_counters_mask(ARMV8_PMU_MAX_COUNTERS);
> @@ -621,7 +569,7 @@ static void run_pmregs_validity_test(uint64_t pmcr_n)
>  			    KVM_ARM64_SYS_REG(clr_reg_id), reg_val);
>  	}
>  
> -	destroy_vpmu_vm();
> +	destroy_vpmu_vm(vpmu_vm);
>  }
>  
>  /*
> @@ -634,7 +582,7 @@ static void run_error_test(uint64_t pmcr_n)
>  	pr_debug("Error test with pmcr_n %lu (larger than the host)\n", pmcr_n);
>  
>  	test_create_vpmu_vm_with_pmcr_n(pmcr_n, true);
> -	destroy_vpmu_vm();
> +	destroy_vpmu_vm(vpmu_vm);
>  }
>  
>  /*
> @@ -645,9 +593,9 @@ static uint64_t get_pmcr_n_limit(void)
>  {
>  	uint64_t pmcr;
>  
> -	create_vpmu_vm(guest_code);
> -	vcpu_get_reg(vpmu_vm.vcpu, KVM_ARM64_SYS_REG(SYS_PMCR_EL0), &pmcr);
> -	destroy_vpmu_vm();
> +	create_vpmu_vm_with_handler(guest_code);
> +	vcpu_get_reg(vpmu_vm->vcpu, KVM_ARM64_SYS_REG(SYS_PMCR_EL0), &pmcr);
> +	destroy_vpmu_vm(vpmu_vm);
>  	return get_pmcr_n(pmcr);
>  }
>  
> diff --git a/tools/testing/selftests/kvm/include/aarch64/vpmu.h b/tools/testing/selftests/kvm/include/aarch64/vpmu.h
> new file mode 100644
> index 000000000000..0a56183644ee
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/include/aarch64/vpmu.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#include <kvm_util.h>
> +
> +#define GICD_BASE_GPA	0x8000000ULL
> +#define GICR_BASE_GPA	0x80A0000ULL
> +
> +struct vpmu_vm {
> +	struct kvm_vm *vm;
> +	struct kvm_vcpu *vcpu;
> +	int gic_fd;
> +};
> +
> +struct vpmu_vm *create_vpmu_vm(void *guest_code);
> +
> +void destroy_vpmu_vm(struct vpmu_vm *vpmu_vm);
> diff --git a/tools/testing/selftests/kvm/lib/aarch64/vpmu.c b/tools/testing/selftests/kvm/lib/aarch64/vpmu.c
> new file mode 100644
> index 000000000000..b3de8fdc555e
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/lib/aarch64/vpmu.c
> @@ -0,0 +1,64 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <kvm_util.h>
> +#include <processor.h>
> +#include <test_util.h>
> +#include <vgic.h>
> +#include <vpmu.h>
> +#include <perf/arm_pmuv3.h>
> +
> +/* Create a VM that has one vCPU with PMUv3 configured. */
> +struct vpmu_vm *create_vpmu_vm(void *guest_code)
> +{
> +	struct kvm_vcpu_init init;
> +	uint8_t pmuver;
> +	uint64_t dfr0, irq = 23;
> +	struct kvm_device_attr irq_attr = {
> +		.group = KVM_ARM_VCPU_PMU_V3_CTRL,
> +		.attr = KVM_ARM_VCPU_PMU_V3_IRQ,
> +		.addr = (uint64_t)&irq,
> +	};
> +	struct kvm_device_attr init_attr = {
> +		.group = KVM_ARM_VCPU_PMU_V3_CTRL,
> +		.attr = KVM_ARM_VCPU_PMU_V3_INIT,
> +	};
> +	struct vpmu_vm *vpmu_vm;
> +
> +	vpmu_vm = calloc(1, sizeof(*vpmu_vm));
> +	TEST_ASSERT(vpmu_vm != NULL, "Insufficient Memory");
> +	memset(vpmu_vm, 0, sizeof(vpmu_vm));
> +
> +	vpmu_vm->vm = vm_create(1);
> +	vm_init_descriptor_tables(vpmu_vm->vm);
> +
> +	/* Create vCPU with PMUv3 */
> +	vm_ioctl(vpmu_vm->vm, KVM_ARM_PREFERRED_TARGET, &init);
> +	init.features[0] |= (1 << KVM_ARM_VCPU_PMU_V3);
> +	vpmu_vm->vcpu = aarch64_vcpu_add(vpmu_vm->vm, 0, &init, guest_code);
> +	vcpu_init_descriptor_tables(vpmu_vm->vcpu);
> +	vpmu_vm->gic_fd = vgic_v3_setup(vpmu_vm->vm, 1, 64,
> +					GICD_BASE_GPA, GICR_BASE_GPA);
> +	__TEST_REQUIRE(vpmu_vm->gic_fd >= 0,
> +		       "Failed to create vgic-v3, skipping");
> +
> +	/* Make sure that PMUv3 support is indicated in the ID register */
> +	vcpu_get_reg(vpmu_vm->vcpu,
> +		     KVM_ARM64_SYS_REG(SYS_ID_AA64DFR0_EL1), &dfr0);
> +	pmuver = FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), dfr0);
> +	TEST_ASSERT(pmuver != ID_AA64DFR0_EL1_PMUVer_IMP_DEF &&
> +		    pmuver >= ID_AA64DFR0_EL1_PMUVer_IMP,
> +		    "Unexpected PMUVER (0x%x) on the vCPU with PMUv3", pmuver);
> +
> +	/* Initialize vPMU */
> +	vcpu_ioctl(vpmu_vm->vcpu, KVM_SET_DEVICE_ATTR, &irq_attr);
> +	vcpu_ioctl(vpmu_vm->vcpu, KVM_SET_DEVICE_ATTR, &init_attr);
> +
> +	return vpmu_vm;
> +}
> +
> +void destroy_vpmu_vm(struct vpmu_vm *vpmu_vm)
> +{
> +	close(vpmu_vm->gic_fd);
> +	kvm_vm_free(vpmu_vm->vm);
> +	free(vpmu_vm);
> +}
Besides looks good to me
Reviewed-by: Eric Auger <eric.auger at redhat.com>

Eric





More information about the linux-arm-kernel mailing list