[PATCH 3/4] arm64: dts: mediatek: mt8195: add DSI and MIPI DPHY nodes

Michael Walle mwalle at kernel.org
Thu Nov 23 05:37:48 PST 2023


Add the two DSI controller node and the associated DPHY nodes.
Individual boards have to enable them in the board device tree.

Signed-off-by: Michael Walle <mwalle at kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 48 ++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 54c674c45b49..0621bb461967 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1714,6 +1714,26 @@ u2port3: usb-phy at 0 {
 			};
 		};
 
+		mipi_tx0: dsi-phy at 11c80000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c80000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: dsi-phy at 11c90000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c90000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c5: i2c at 11d00000 {
 			compatible = "mediatek,mt8195-i2c",
 				     "mediatek,mt8192-i2c";
@@ -2737,6 +2757,20 @@ dither0: dither at 1c007000 {
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
 		};
 
+		dsi0: dsi at 1c008000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c008000 0 0x1000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI0>,
+				 <&vdosys0 CLK_VDO0_DSI0_DSI>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		dsc0: dsc at 1c009000 {
 			compatible = "mediatek,mt8195-disp-dsc";
 			reg = <0 0x1c009000 0 0x1000>;
@@ -2746,6 +2780,20 @@ dsc0: dsc at 1c009000 {
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
 		};
 
+		dsi1: dsi at 1c012000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c012000 0 0x1000>;
+			interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI1>,
+				 <&vdosys0 CLK_VDO0_DSI1_DSI>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		merge0: merge at 1c014000 {
 			compatible = "mediatek,mt8195-disp-merge";
 			reg = <0 0x1c014000 0 0x1000>;
-- 
2.39.2




More information about the linux-arm-kernel mailing list