[PATCH 1/2] pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem

[Sudeep Holla]

The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the firmware to the pmdomain subsystem.

Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
---
 drivers/firmware/arm_scmi/Kconfig | 25 -------------------------
 drivers/pmdomain/Kconfig          |  1 +
 drivers/pmdomain/arm/Kconfig      | 25 +++++++++++++++++++++++++
 3 files changed, 26 insertions(+), 25 deletions(-)
 create mode 100644 drivers/pmdomain/arm/Kconfig

diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig
index 706d1264d038..aa5842be19b2 100644
--- a/drivers/firmware/arm_scmi/Kconfig
+++ b/drivers/firmware/arm_scmi/Kconfig
@@ -168,31 +168,6 @@ config ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE

 endif #ARM_SCMI_PROTOCOL

-config ARM_SCMI_POWER_DOMAIN
-	tristate "SCMI power domain driver"
-	depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
-	default y
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  This enables support for the SCMI power domains which can be
-	  enabled or disabled via the SCP firmware
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called scmi_pm_domain. Note this may needed early in boot
-	  before rootfs may be available.
-
-config ARM_SCMI_PERF_DOMAIN
-	tristate "SCMI performance domain driver"
-	depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
-	default y
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  This enables support for the SCMI performance domains which can be
-	  enabled or disabled via the SCP firmware.
-
-	  This driver can also be built as a module. If so, the module will be
-	  called scmi_perf_domain.
-
 config ARM_SCMI_POWER_CONTROL
 	tristate "SCMI system power control driver"
 	depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig
index c98c5bf75a14..23c64851a5b0 100644
--- a/drivers/pmdomain/Kconfig
+++ b/drivers/pmdomain/Kconfig
@@ -4,6 +4,7 @@ menu "PM Domains"
 source "drivers/pmdomain/actions/Kconfig"
 source "drivers/pmdomain/amlogic/Kconfig"
 source "drivers/pmdomain/apple/Kconfig"
+source "drivers/pmdomain/arm/Kconfig"
 source "drivers/pmdomain/bcm/Kconfig"
 source "drivers/pmdomain/imx/Kconfig"
 source "drivers/pmdomain/mediatek/Kconfig"
diff --git a/drivers/pmdomain/arm/Kconfig b/drivers/pmdomain/arm/Kconfig
new file mode 100644
index 000000000000..acbe4331aaf7
--- /dev/null
+++ b/drivers/pmdomain/arm/Kconfig
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config ARM_SCMI_PERF_DOMAIN
+	tristate "SCMI performance domain driver"
+	depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
+	default y
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the SCMI performance domains which can be
+	  enabled or disabled via the SCP firmware.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called scmi_perf_domain.
+
+config ARM_SCMI_POWER_DOMAIN
+	tristate "SCMI power domain driver"
+	depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
+	default y
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the SCMI power domains which can be
+	  enabled or disabled via the SCP firmware
+
+	  This driver can also be built as a module. If so, the module
+	  will be called scmi_pm_domain. Note this may needed early in boot
+	  before rootfs may be available.
--
2.42.0