[PATCH] phy: mediatek: mipi: mt8183: fix minimal supported frequency

[Michael Walle]

The lowest supported clock frequency of the PHY is 125MHz (see also
mtk_mipi_tx_pll_enable()), but the clamping in .round_rate() has the
wrong minimal value, which will make the .enable() op return -EINVAL on
low frequencies. Fix the minimal clamping value.

Fixes: efda51a58b4a ("drm/mediatek: add mipi_tx driver for mt8183")
Signed-off-by: Michael Walle <mwalle at kernel.org>
---
 drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
index f021ec5a70e5..553725e1269c 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c
@@ -100,7 +100,7 @@ static void mtk_mipi_tx_pll_disable(struct clk_hw *hw)
 static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 				       unsigned long *prate)
 {
-	return clamp_val(rate, 50000000, 1600000000);
+	return clamp_val(rate, 125000000, 1600000000);
 }
 
 static const struct clk_ops mtk_mipi_tx_pll_ops = {
-- 
2.39.2