[PATCH v2 0/4] dt-bindings: dma: ti: k3*: Update optional reg regions

[Vignesh Raghavendra]

DMAs on TI K3 SoCs have channel configuration registers region which are
usually hidden from Linux and configured via Device Manager Firmware
APIs. But certain early SWs like bootloader which run before Device
Manager is fully up would need to directly configure these registers and
thus require to be in DT description.

This add bindings for such configuration regions. Backward
compatibility is maintained to existing DT by only mandating existing
regions to be present and this new region as optional.

This update is mainly to aid SPL/U-Boot to reuse kernel DT as is. And is
applicable to entire K3 family of SoCs.

v2:
Fix issues pointed out by Conor and Peter
* Add new patch 1/4 to describe existing register regions
* Rename cfg region as ring
* Add bchan register space for bcdma
* Include descriptions for new registers
v1: https://lore.kernel.org/all/20230810174356.3322583-1-vigneshr@ti.com/

Vignesh Raghavendra (4):
  dt-bindings: dma: ti: k3-*: Add descriptions for register regions
  dt-bindings: dma: ti: k3-bcdma: Describe cfg register regions
  dt-bindings: dma: ti: k3-pktdma: Describe cfg register regions
  dt-bindings: dma: ti: k3-udma: Describe cfg register regions

 .../devicetree/bindings/dma/ti/k3-bcdma.yaml  | 43 +++++++++++++------
 .../devicetree/bindings/dma/ti/k3-pktdma.yaml | 26 +++++++++--
 .../devicetree/bindings/dma/ti/k3-udma.yaml   | 20 +++++++--
 3 files changed, 71 insertions(+), 18 deletions(-)

-- 
2.42.0