[PATCH v2 4/9] ARM: dts: rockchip: rv1126: Add i2c2 nodes

[Krzysztof Kozlowski]

On 22/11/2023 13:22, Tim Lunn wrote:
> Add i2c2 node and i2c2_xfer pinctrl for Rockchip RV1126
> 
> Signed-off-by: Tim Lunn <tim at feathertop.org>
> ---
> 
> (no changes since v1)
> 
>  arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi | 10 ++++++++++
>  arch/arm/boot/dts/rockchip/rv1126.dtsi         | 15 +++++++++++++++
>  2 files changed, 25 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
> index 4f85b7b3fc4c..167a48afa3a4 100644
> --- a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
> @@ -87,6 +87,16 @@ i2c0_xfer: i2c0-xfer {
>  				<0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>;
>  		};
>  	};
> +	i2c2 {
> +		/omit-if-no-ref/
> +		i2c2_xfer: i2c2-xfer {
> +			rockchip,pins =
> +				/* i2c2_scl */
> +				<0 RK_PC2 1 &pcfg_pull_none_drv_level_0_smt>,
> +				/* i2c2_sda */
> +				<0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>;
> +		};
> +	};
>  	pwm2 {
>  		/omit-if-no-ref/
>  		pwm2m0_pins: pwm2m0-pins {
> diff --git a/arch/arm/boot/dts/rockchip/rv1126.dtsi b/arch/arm/boot/dts/rockchip/rv1126.dtsi
> index 6c5c928f06c7..cf1df75df418 100644
> --- a/arch/arm/boot/dts/rockchip/rv1126.dtsi
> +++ b/arch/arm/boot/dts/rockchip/rv1126.dtsi
> @@ -21,6 +21,7 @@ / {
>  
>  	aliases {
>  		i2c0 = &i2c0;
> +		i2c2 = &i2c2;

No, this should be per-board to match board labeling/schematics.



Best regards,
Krzysztof