[PATCH v3 04/20] soc: mediatek: mtk-svs: Build bank name string dynamically
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Tue Nov 21 04:50:28 PST 2023
In svs_bank_resource_setup() there is a "big" switch assigning different
names depending on sw_id and type and this will surely grow: for example
MT8186 has got a two-line type (high/low) SVS bank for CPU_BIG, and this
would require more switch nesting.
Simplify all of this by changing that to a devm_kasprintf() call that
will concatenate the SW_ID string (e.g. SVSB_CPU_LITTLE) with the Type
string (e.g. _LOW), resulting in the expected full bank name (e.g.
SVSB_CPU_LITTLE_LOW).
This being a dynamic allocation can be slower, but this happens only
once in the life of this driver and it's not a performance path, so it's
totally acceptable.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
drivers/soc/mediatek/mtk-svs.c | 39 +++++++++++++++-------------------
1 file changed, 17 insertions(+), 22 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index ddbb9ba3e47d..1c7592fd6ae7 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -332,6 +332,14 @@ static const u32 svs_regs_v2[] = {
[THSLPEVEB] = 0x330,
};
+static const char * const svs_swid_names[SVSB_SWID_MAX] = {
+ "SVSB_CPU_LITTLE", "SVSB_CPU_BIG", "SVSB_CCI", "SVSB_GPU"
+};
+
+static const char * const svs_type_names[SVSB_TYPE_MAX] = {
+ "", "_LOW", "_HIGH"
+};
+
/**
* struct svs_platform - svs platform control
* @base: svs platform register base
@@ -1696,34 +1704,21 @@ static int svs_bank_resource_setup(struct svs_platform *svsp)
for (idx = 0; idx < svsp->bank_max; idx++) {
svsb = &svsp->banks[idx];
- switch (svsb->sw_id) {
- case SVSB_SWID_CPU_LITTLE:
- svsb->name = "SVSB_CPU_LITTLE";
- break;
- case SVSB_SWID_CPU_BIG:
- svsb->name = "SVSB_CPU_BIG";
- break;
- case SVSB_SWID_CCI:
- svsb->name = "SVSB_CCI";
- break;
- case SVSB_SWID_GPU:
- if (svsb->type == SVSB_TYPE_HIGH)
- svsb->name = "SVSB_GPU_HIGH";
- else if (svsb->type == SVSB_TYPE_LOW)
- svsb->name = "SVSB_GPU_LOW";
- else
- svsb->name = "SVSB_GPU";
- break;
- default:
- dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ if (svsb->sw_id >= SVSB_SWID_MAX || svsb->type >= SVSB_TYPE_MAX) {
+ dev_err(svsb->dev, "unknown bank sw_id or type\n");
return -EINVAL;
}
- svsb->dev = devm_kzalloc(svsp->dev, sizeof(*svsb->dev),
- GFP_KERNEL);
+ svsb->dev = devm_kzalloc(svsp->dev, sizeof(*svsb->dev), GFP_KERNEL);
if (!svsb->dev)
return -ENOMEM;
+ svsb->name = devm_kasprintf(svsp->dev, GFP_KERNEL, "%s%s",
+ svs_swid_names[svsb->sw_id],
+ svs_type_names[svsb->type]);
+ if (!svsb->name)
+ return -ENOMEM;
+
ret = dev_set_name(svsb->dev, "%s", svsb->name);
if (ret)
return ret;
--
2.42.0
More information about the linux-arm-kernel
mailing list