[RFC PATCH net-next v2 06/10] net: ethtool: Introduce a command to list PHYs on an interface

[Andrew Lunn]

> diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
> index 2540c70952ff..29ef675f45c0 100644
> --- a/Documentation/networking/ethtool-netlink.rst
> +++ b/Documentation/networking/ethtool-netlink.rst
> @@ -57,6 +57,7 @@ Structure of this header is
>    ``ETHTOOL_A_HEADER_DEV_INDEX``  u32     device ifindex
>    ``ETHTOOL_A_HEADER_DEV_NAME``   string  device name
>    ``ETHTOOL_A_HEADER_FLAGS``      u32     flags common for all requests
> +  ``ETHTOOL_A_HEADER_PHY_INDEX``  u32     phy device index
>    ==============================  ======  =============================
>  
>  ``ETHTOOL_A_HEADER_DEV_INDEX`` and ``ETHTOOL_A_HEADER_DEV_NAME`` identify the
> @@ -81,6 +82,12 @@ the behaviour is backward compatible, i.e. requests from old clients not aware
>  of the flag should be interpreted the way the client expects. A client must
>  not set flags it does not understand.
>  
> +``ETHTOOL_A_HEADER_PHY_INDEX`` identify the ethernet PHY the message relates to.
> +As there are numerous commands that are related to PHY configuration, and because
> +we can have more than one PHY on the link, the PHY index can be passed in the
> +request for the commands that needs it. It is however not mandatory, and if it
> +is not passed for commands that target a PHY, the net_device.phydev pointer
> +is used, as a fallback that keeps the legacy behaviour.

O.K, you did document it :-)

But i would make this part of the previous patch.

> +Kernel response contents:
> +
> +  =================================     ======  ==========================
> +  ``ETHTOOL_A_PHY_HEADER``              nested  request header
> +  ``ETHTOOL_A_PHY_INDEX``               u32     the phy's unique index, that can
> +                                                be used for phy-specific requests
> +  ``ETHTOOL_A_PHY_DRVNAME``             string  the phy driver name
> +  ``ETHTOOL_A_PHY_NAME``                string  the phy device name
> +  ``ETHTOOL_A_PHY_UPSTREAM_TYPE``       u32     the type of device this phy is
> +                                                connected to
> +  ``ETHTOOL_A_PHY_UPSTREAM_PHY``        nested  if the phy is connected to another
> +                                                phy, this nest contains info on
> +                                                that connection
> +  ``ETHTOOL_A_PHY_DOWNSTREAM_SFP_NAME`` string  if the phy controls an sfp bus,
> +                                                the name of the sfp bus
> +  ``ETHTOOL_A_PHY_ID``                  u32     the phy id if the phy is C22

Maybe a future extension. We could make phy_bus_match() set
phydev->phy_id to the ID it matched to the driver when doing C45. We
would then always have a value here.

> --- a/include/linux/ethtool_netlink.h
> +++ b/include/linux/ethtool_netlink.h
> @@ -118,5 +118,10 @@ static inline bool ethtool_dev_mm_supported(struct net_device *dev)
>  	return false;
>  }
>  
> +int ethnl_phy_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
> +{
> +	return -EOPNOTSUPP;
> +}

This is a header file, so should probably be static inline.

     Andrew