[PATCH v2 0/7] usb: cdns: fix suspend on J7200 by assuming reset-on-resume

[Krzysztof Kozlowski]

On 20/11/2023 18:06, Théo Lebrun wrote:
> Hi,
> 
> Suspend on the TI J7200 platform is broken currently. There are two
> components that need to be patched so that they assume reset on
> resume: (1) the TI wrapper cdns3-ti & (2) the HOST role of the
> controller.
> 
> About (1): the TI wrapper only did its hardware configuration at probe
> time. Update so that it is done at resume on J7200 SoC.
> 
> About (2): signal from cdns3-ti to cdns3 host to xHCI that the
> controller resets on resume. This way we avoid the following warning:
> 
>    xhci-hcd xhci-hcd.1.auto: xHC error in resume, USBSTS 0x401, Reinit
> 
> Strictly speaking (2) is not required to have working suspend on J7200;
> its only goal is to silence this warning.
> 
> Those patches have been tested on the TI J7200 EVM GP. No need to

Yeah, but you forgot about dtbs_check testing. It's a step before
testing on the device. It does not make sense to test a code if it
causes build-time warnings.

Best regards,
Krzysztof