[PATCH V2 4/5] arm64: dts: qcom: x1e80100: Add Compute Reference Device
Abel Vesa
abel.vesa at linaro.org
Mon Nov 20 01:04:58 PST 2023
On 23-11-17 17:09:30, Sibi Sankar wrote:
> Add basic support for X1E80100 CRD board dts, which allows it to boot
> to a shell.
>
> Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> Signed-off-by: Rajendra Nayak <quic_rjendra at quicinc.com>
> Signed-off-by: Sibi Sankar <quic_sibis at quicinc.com>
> ---
You dropped the initial authorship here. Please fix and re-send.
Thanks,
Abel
>
> v2:
> * Update the part number from sc8380xp to x1e80100.
> * Override the serial uart with "qcom,geni-debug-uart" in the board files. [Rajendra]
> * Document reserved gpios. [Konrad]
>
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 425 ++++++++++++++++++++++
> 2 files changed, 426 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-crd.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 43bd9fcf35e5..e3ab1c91307a 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -231,4 +231,5 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> new file mode 100644
> index 000000000000..82d1ecac0ec9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> @@ -0,0 +1,425 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +
> +#include "x1e80100.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. X1E80100 CRD";
> + compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
> +
> + aliases {
> + serial0 = &uart21;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vreg_edp_3p3: regulator-edp-3p3 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_EDP_3P3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&edp_reg_en>;
> + pinctrl-names = "default";
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm8550-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vdd-bob1-supply = <&vph_pwr>;
> + vdd-bob2-supply = <&vph_pwr>;
> + vdd-l1-supply = <&vreg_s4c_1p8>;
> + vdd-l2-l13-l14-supply = <&vreg_bob1>;
> + vdd-l4-supply = <&vreg_s4c_1p8>;
> + vdd-l5-l16-supply = <&vreg_bob1>;
> + vdd-l6-l7-supply = <&vreg_bob2>;
> + vdd-l8-l9-supply = <&vreg_bob1>;
> + vdd-l10-supply = <&vreg_s4c_1p8>;
> + vdd-l12-supply = <&vreg_s5j_1p2>;
> + vdd-l15-supply = <&vreg_s4c_1p8>;
> + vdd-l17-supply = <&vreg_bob2>;
> +
> + vreg_bob1: bob1 {
> + regulator-name = "vreg_bob1";
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob2: bob2 {
> + regulator-name = "vreg_bob2";
> + regulator-min-microvolt = <2504000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1b_1p8: ldo1 {
> + regulator-name = "vreg_l1b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2b_3p0: ldo2 {
> + regulator-name = "vreg_l2b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4b_1p8: ldo4 {
> + regulator-name = "vreg_l4b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5b_3p0: ldo5 {
> + regulator-name = "vreg_l5b_3p0";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6b_1p8: ldo6 {
> + regulator-name = "vreg_l6b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7b_2p8: ldo7 {
> + regulator-name = "vreg_l7b_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8b_3p0: ldo8 {
> + regulator-name = "vreg_l8b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9b_2p9: ldo9 {
> + regulator-name = "vreg_l9b_2p9";
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10b_1p8: ldo10 {
> + regulator-name = "vreg_l10b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12b_1p2: ldo12 {
> + regulator-name = "vreg_l12b_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13b_3p0: ldo13 {
> + regulator-name = "vreg_l13b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l14b_3p0: ldo14 {
> + regulator-name = "vreg_l14b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l15b_1p8: ldo15 {
> + regulator-name = "vreg_l15b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l16b_2p9: ldo16 {
> + regulator-name = "vreg_l16b_2p9";
> + regulator-min-microvolt = <2912000>;
> + regulator-max-microvolt = <2912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l17b_2p5: ldo17 {
> + regulator-name = "vreg_l17b_2p5";
> + regulator-min-microvolt = <2504000>;
> + regulator-max-microvolt = <2504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vdd-l1-supply = <&vreg_s5j_1p2>;
> + vdd-l2-supply = <&vreg_s1f_0p7>;
> + vdd-l3-supply = <&vreg_s1f_0p7>;
> + vdd-s4-supply = <&vph_pwr>;
> +
> + vreg_s4c_1p8: smps4 {
> + regulator-name = "vreg_s4c_1p8";
> + regulator-min-microvolt = <1856000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1c_1p2: ldo1 {
> + regulator-name = "vreg_l1c_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2c_0p8: ldo2 {
> + regulator-name = "vreg_l2c_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3c_0p8: ldo3 {
> + regulator-name = "vreg_l3c_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-2 {
> + compatible = "qcom,pmc8380-rpmh-regulators";
> + qcom,pmic-id = "d";
> +
> + vdd-l1-supply = <&vreg_s1f_0p7>;
> + vdd-l2-supply = <&vreg_s1f_0p7>;
> + vdd-l3-supply = <&vreg_s4c_1p8>;
> + vdd-s1-supply = <&vph_pwr>;
> +
> + vreg_l1d_0p8: ldo1 {
> + regulator-name = "vreg_l1d_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2d_0p9: ldo2 {
> + regulator-name = "vreg_l2d_0p9";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3d_1p8: ldo3 {
> + regulator-name = "vreg_l3d_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-3 {
> + compatible = "qcom,pmc8380-rpmh-regulators";
> + qcom,pmic-id = "e";
> +
> + vdd-l2-supply = <&vreg_s1f_0p7>;
> + vdd-l3-supply = <&vreg_s5j_1p2>;
> +
> + vreg_l2e_0p8: ldo2 {
> + regulator-name = "vreg_l2e_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3e_1p2: ldo3 {
> + regulator-name = "vreg_l3e_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-4 {
> + compatible = "qcom,pmc8380-rpmh-regulators";
> + qcom,pmic-id = "f";
> +
> + vdd-l1-supply = <&vreg_s5j_1p2>;
> + vdd-l2-supply = <&vreg_s5j_1p2>;
> + vdd-l3-supply = <&vreg_s5j_1p2>;
> + vdd-s1-supply = <&vph_pwr>;
> +
> + vreg_s1f_0p7: smps1 {
> + regulator-name = "vreg_s1f_0p7";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1f_1p0: ldo1 {
> + regulator-name = "vreg_l1f_1p0";
> + regulator-min-microvolt = <1024000>;
> + regulator-max-microvolt = <1024000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2f_1p0: ldo2 {
> + regulator-name = "vreg_l2f_1p0";
> + regulator-min-microvolt = <1024000>;
> + regulator-max-microvolt = <1024000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3f_1p0: ldo3 {
> + regulator-name = "vreg_l3f_1p0";
> + regulator-min-microvolt = <1024000>;
> + regulator-max-microvolt = <1024000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-6 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "i";
> +
> + vdd-l1-supply = <&vreg_s4c_1p8>;
> + vdd-l2-supply = <&vreg_s5j_1p2>;
> + vdd-l3-supply = <&vreg_s1f_0p7>;
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> +
> + vreg_s1i_0p9: smps1 {
> + regulator-name = "vreg_s1i_0p9";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s2i_1p0: smps2 {
> + regulator-name = "vreg_s2i_1p0";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1i_1p8: ldo1 {
> + regulator-name = "vreg_l1i_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2i_1p2: ldo2 {
> + regulator-name = "vreg_l2i_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3i_0p8: ldo3 {
> + regulator-name = "vreg_l3i_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-7 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "j";
> +
> + vdd-l1-supply = <&vreg_s1f_0p7>;
> + vdd-l2-supply = <&vreg_s5j_1p2>;
> + vdd-l3-supply = <&vreg_s1f_0p7>;
> + vdd-s5-supply = <&vph_pwr>;
> +
> + vreg_s5j_1p2: smps5 {
> + regulator-name = "vreg_s5j_1p2";
> + regulator-min-microvolt = <1256000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1j_0p8: ldo1 {
> + regulator-name = "vreg_l1j_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2j_1p2: ldo2 {
> + regulator-name = "vreg_l2j_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3j_0p8: ldo3 {
> + regulator-name = "vreg_l3j_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +};
> +
> +&qupv3_2 {
> + status = "okay";
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <34 2>, <44 4>, /* SPI (TPM) */
> + <238 1>; /* UFS Reset */
> +
> + edp_reg_en: edp-reg-en-state {
> + pins = "gpio70";
> + function = "gpio";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +};
> +
> +&uart21 {
> + compatible = "qcom,geni-debug-uart";
> + status = "okay";
> +};
> --
> 2.17.1
>
More information about the linux-arm-kernel
mailing list