[PATCH 2/8] arm64: dts: ti: k3-am65: Convert serdes_mux node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 5ebb87f467de5..85211123cdf31 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -490,11 +490,12 @@ serdes1_clk: clock at 4090 {
 			reg = <0x00004090 0x4>;
 		};
 
-		serdes_mux: mux-controller {
-			compatible = "mmio-mux";
+		serdes_mux: mux-controller at 4080 {
+			compatible = "reg-mux";
+			reg = <0x4080 0x14>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
-					<0x4090 0x3>; /* SERDES1 lane select */
+			mux-reg-masks = <0x0 0x3>, /* SERDES0 lane select */
+					<0x10 0x3>; /* SERDES1 lane select */
 		};
 
 		dss_oldi_io_ctrl: dss-oldi-io-ctrl at 41e0 {
-- 
2.39.2