[PATCH v1 19/20] arm64: dts: mediatek: mt8192: Add Smart Voltage Scaling node

[AngeloGioacchino Del Regno]

Add the MediaTek SVS node: this will lower the voltage of various
components of the SoC based on chip quality (read from fuses) in
order to save power and generate less heat.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt8192.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 238f6eb25832..6dd32dbfb832 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -809,6 +809,18 @@ lvts_ap: thermal-sensor at 1100b000 {
 			#thermal-sensor-cells = <1>;
 		};
 
+		svs: svs at 1100bc00 {
+			compatible = "mediatek,mt8192-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>, <&lvts_e_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg MT8192_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
 		pwm0: pwm at 1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
-- 
2.42.0