[PATCH 3/5] arm64: dts: qcom: Add base SC8380XP dtsi and the QCP dts

[Sibi Sankar]

Hey Konrad,

On 10/26/23 16:06, Konrad Dybcio wrote:
> 
> 
> On 10/25/23 16:24, Sibi Sankar wrote:
>> From: Rajendra Nayak <quic_rjendra at quicinc.com>
>>
>> Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
>> SC8380XP SoC, describing the CPUs, GCC and RPMHCC clock controllers,
>> geni UART, interrupt controller, TLMM, reserved memory, interconnects,
>> SMMU and LLCC nodes.
>>
>> Co-developed-by: Abel Vesa <abel.vesa at linaro.org>
>> Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
>> Signed-off-by: Rajendra Nayak <quic_rjendra at quicinc.com>
>> Co-developed-by: Sibi Sankar <quic_sibis at quicinc.com>
>> Signed-off-by: Sibi Sankar <quic_sibis at quicinc.com>
>> ---
> [...]
> 
>> +&tlmm {
>> +    gpio-reserved-ranges = <33 3>, <44 4>, <238 1>;
> It would be really cool if you added an explanation on why these
> GPIOs need to be reserved, especially since you can see what's
> connected on there on schematics. So, like:
> 
> gpio-reserved-ranges = <33 3>, /* something */
>                 <44 4>, /* something else (fp scanner?)
>                 <238 1>; /* UFS reset? */

will do.

> 
> 
> [...]
> 
>> +            compatible = "qcom,oryon";
> Again, this compatible won't fly unless all of these cores
> are totally identical and Oryon is only a name for this
> generation on this SoC (which I believe not to be the case).
> 
>> +            reg = <0x0 0x0>;
>> +            enable-method = "psci";
>> +            next-level-cache = <&L1_0>;
>> +
>> +            L1_0: l1-cache {
>> +                compatible = "cache";
> I'm not sure if L1 is supposed to be described in the DT,
> Krzysztof should know.
> 
>> +                next-level-cache = <&L2_0>;
>> +
>> +                L2_0: l2-cache-0 {
>> +                    compatible = "cache";
> cache-level?
> cache-unified?

ack will remove the l1 and use ^^ appropriately.

> 
> [...]
> 
>> +    memory at 80000000 {
>> +        device_type = "memory";
>> +        /* We expect the bootloader to fill in the size */
>> +        reg = <0 0x80000000 0 0x80000000>;
> That contradicts the comment you made above. Plus, 2 GiB seems a
> bit low for this SoC :D

will fix this.

> 
> [...]
> 
>> +        gunyah_hyp_mem: gunyah-hyp-region at 80000000 {
> you can probably strip the "-region" part, as this is implied by
> being a child of /reserved-memory

ok, will do but all the previous SoCs do it differently.

> 
>> +        pld_pep_mem: pld-pep-region at 81f30000 {
> What's PLD?
> 
> What's this region used for? PEP is a Windows invention.
> 

We list all the possible reserved memory regions from the reference doc.
I can remove the unused regions in the platforms dts later once this
series lands.

> [...]
> 
>> +        av1_encoder_mem: av1-encoder-region at 8e900000 {
> Is AV1enc hardware separate from iris?

no, it isn't separate from iris AFAIK.

> 
> [...]
> 
>> +        gcc: clock-controller at 100000 {
>> +            compatible = "qcom,sc8380xp-gcc";
>> +            reg = <0 0x100000 0 0x200000>;
> The address part of reg should be padded to 8 hex digits.

thanks for catching this.

> 
>> +
>> +                interconnects = <&clk_virt MASTER_QUP_CORE_2 0 
>> &clk_virt SLAVE_QUP_CORE_2 0>,
> QCOM_ICC_TAG_ALWAYS would be nicer than 0 (see sa8775p)

will do.

> 
> [...]
> 
>> +
>> +            interrupts =    <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> One space after and before '='

ack

> 
> Konrad