[PATCH 0/8] arm64: dts: ti: Enable CSI cameras for AM62 family

[Martyn Welch]

On 15/11/2023 09:51, Jai Luthra wrote:
> This series enables CSI camera support on BeaglePlay, SK-AM62 and
> SK-AM62A, now that the dt-bindings and driver support for CSI-RX related
> IPs is merged in v6.7-rc1.
>
> Along with the device tree nodes for CSI-RX, add new DT overlays for
> different camera modules like RPiv2 (IMX219) or PCam5C (OV5640).
>
> Signed-off-by: Jai Luthra <j-luthra at ti.com>


Tested applied to master on AM625-SK with OV5640:

Tested-by: Martyn Welch <martyn.welch at collabora.com>


> ---
> Jai Luthra (8):
>        arm64: defconfig: Enable AM62 CSI2RX
>        arm64: dts: ti: Enable CSI-RX on AM62
>        arm64: dts: ti: Enable CSI-RX on AM62A
>        arm64: dts: ti: k3-am625-beagleplay: Add overlays for OV5640
>        arm64: dts: ti: k3-am62x-sk: Enable camera peripherals
>        arm64: dts: ti: k3-am62x: Add overlays for OV5640
>        arm64: dts: ti: k3-am62a7-sk: Enable camera peripherals
>        arm64: dts: ti: k3-am62x: Add overlay for IMX219
>
>   arch/arm64/boot/dts/ti/Makefile                    | 17 ++++
>   arch/arm64/boot/dts/ti/k3-am62-main.dtsi           | 62 ++++++++++++++
>   .../dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso    | 77 +++++++++++++++++
>   .../ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso   | 77 +++++++++++++++++
>   arch/arm64/boot/dts/ti/k3-am62a-main.dtsi          | 99 ++++++++++++++++++++++
>   arch/arm64/boot/dts/ti/k3-am62a7-sk.dts            | 35 ++++++++
>   arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi     | 15 ++++
>   .../arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso | 76 +++++++++++++++++
>   .../arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso | 74 ++++++++++++++++
>   .../boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso  | 74 ++++++++++++++++
>   arch/arm64/configs/defconfig                       |  3 +
>   11 files changed, 609 insertions(+)
> ---
> base-commit: a93441cc391f1923d031dcd463e3444c7c21bffe
> change-id: 20231114-csi_dts-5f433aca3665
>
> Best regards,