[PATCH net-next v8 8/9] ARM64: dts: Add special compatibles for the Turris Mox

[Linus Walleij]

These special compatibles are added to the Marvell Armada 3720
Turris Mox in order to be able to special-case and avoid
warnings on the non-standard nodenames that are ABI on this
one board due to being used in deployed versions of U-Boot.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 66cd98b67744..a89747d2a600 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -312,7 +312,7 @@ phy1: ethernet-phy at 1 {
 	 * Also do not touch the "ports" or "port at n" nodes. These are also ABI.
 	 */
 	switch0 at 10 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x10>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -438,7 +438,7 @@ port-sfp at a {
 
 	/* NOTE: this node name is ABI, don't change it! */
 	switch0 at 2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -506,7 +506,7 @@ port at 5 {
 
 	/* NOTE: this node name is ABI, don't change it! */
 	switch1 at 11 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x11>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -632,7 +632,7 @@ port-sfp at a {
 
 	/* NOTE: this node name is ABI, don't change it! */
 	switch1 at 2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -700,7 +700,7 @@ port at 5 {
 
 	/* NOTE: this node name is ABI, don't change it! */
 	switch2 at 12 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x12>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -817,7 +817,7 @@ port-sfp at a {
 
 	/* NOTE: this node name is ABI, don't change it! */
 	switch2 at 2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;

-- 
2.34.1