[PATCH net-next v8 2/9] dt-bindings: net: mvusb: Fix up DSA example
Linus Walleij
linus.walleij at linaro.org
Mon Nov 13 15:35:57 PST 2023
When adding a proper schema for the Marvell mx88e6xxx switch,
the scripts start complaining about this embedded example:
dtschema/dtc warnings/errors:
net/marvell,mvusb.example.dtb: switch at 0: ports: '#address-cells'
is a required property
from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
net/marvell,mvusb.example.dtb: switch at 0: ports: '#size-cells'
is a required property
from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
Fix this up by extending the example with those properties in
the ports node.
While we are at it, rename "ports" to "ethernet-ports" and rename
"switch" to "ethernet-switch" as this is recommended practice.
Reviewed-by: Andrew Lunn <andrew at lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean at nxp.com>
Reviewed-by: Rob Herring <robh at kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli at broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
index 3a3325168048..ab838c1ffeed 100644
--- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
+++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
@@ -50,11 +50,14 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- switch at 0 {
+ ethernet-switch at 0 {
compatible = "marvell,mv88e6190";
reg = <0x0>;
- ports {
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
/* Port definitions */
};
--
2.34.1
More information about the linux-arm-kernel
mailing list