[PATCH V3 3/3] arm64: dts: Add watchdog node for Amlogic S4 SoCs

[neil.armstrong at linaro.org]

On 27/10/2023 12:43, Huqiang Qin wrote:
> Add watchdog device.
> 
> Signed-off-by: Huqiang Qin <huqiang.qin at amlogic.com>
> ---
>   arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> index e0cfc54ebccb..2344b2d741c3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> @@ -92,6 +92,12 @@ apb4: bus at fe000000 {
>   			#size-cells = <2>;
>   			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>   
> +			watchdog at 2100 {
> +				compatible = "amlogic,s4-wdt", "amlogic,t7-wdt";
> +				reg = <0x0 0x2100 0x0 0x10>;
> +				clocks = <&xtal>;
> +			};
> +
>   			periphs_pinctrl: pinctrl at 4000 {
>   				compatible = "amlogic,meson-s4-periphs-pinctrl";
>   				#address-cells = <2>;

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>