[PATCH v1] ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)

[Bruno Thomsen]

Den fre. 3. nov. 2023 kl. 22.07 skrev Fabio Estevam <festevam at gmail.com>:
>
> [Adding Bruno and Alexander]
>
> On Thu, Nov 2, 2023 at 7:12 PM João Rodrigues <jrodrigues at ubimet.com> wrote:
> >
> > From: João Rodrigues <jrodrigues at ubimet.com>
> >
> > TQMa7x (revision 01xxx) uses a LM75A temperature sensor.
> > The two sensors use different I2C addresses, so we can set both sensors
> > simultaneously.

Hi João,

Looks correct to me and an elegant way of adding support for rev 01xx boards.

Reviewed-by: Bruno Thomsen <bruno.thomsen at gmail.com>

After this change the imx7d-flex-concentrator.dts needs to be updated
as it uses TQMa7d rev 02xx boards with something like this:

/* TQMa7d 02xx */
&se97b {
        status = "okay";
};

I can send a follow up patch when this change lands.

/Bruno

> >
> > Signed-off-by: João Rodrigues <jrodrigues at ubimet.com>
> > ---
> >  arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 9 +++++++--
> >  1 file changed, 7 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
> > index fe42b0a4683..3fc3130f9de 100644
> > --- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
> > +++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
> > @@ -128,11 +128,16 @@ vgen6_reg: vldo4 {
> >                 };
> >         };
> >
> > -       /* NXP SE97BTP with temperature sensor + eeprom */
> > +       /* LM75A temperature sensor, TQMa7x 01xx */
> > +       lm75a: temperature-sensor at 48 {
> > +               compatible = "national,lm75a";
> > +               reg = <0x48>;
> > +       };
> > +
> > +       /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
> >         se97b: temperature-sensor-eeprom at 1e {
> >                 compatible = "nxp,se97b", "jedec,jc-42.4-temp";
> >                 reg = <0x1e>;
> > -               status = "okay";
> >         };
> >
> >         /* ST M24C64 */
> > --
> > 2.25.1
> >