[PATCH 2/3] arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Mon Nov 6 02:48:42 PST 2023
Hello,
[again Cc -= Philippe Schenker]
On Mon, Nov 06, 2023 at 10:52:04AM +0100, Alexander Stein wrote:
> i.MX8QM/QXP supports inverted PWM output, thus #pwm-cells needs to be set
> to 3.
>
> Fixes: a05c329644d81 ("arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3")
> Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> ---
> arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
> index 49ad3413db948..7e510b21bbac5 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
> @@ -29,7 +29,7 @@ lsio_pwm0: pwm at 5d000000 {
> <&pwm0_lpcg 1>;
> assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
> assigned-clock-rates = <24000000>;
> - #pwm-cells = <2>;
> + #pwm-cells = <3>;
> interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
> @@ -42,7 +42,7 @@ lsio_pwm1: pwm at 5d010000 {
> <&pwm1_lpcg 1>;
> assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
> assigned-clock-rates = <24000000>;
> - #pwm-cells = <2>;
> + #pwm-cells = <3>;
> interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
> @@ -55,7 +55,7 @@ lsio_pwm2: pwm at 5d020000 {
> <&pwm2_lpcg 1>;
> assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
> assigned-clock-rates = <24000000>;
> - #pwm-cells = <2>;
> + #pwm-cells = <3>;
> interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
> @@ -68,7 +68,7 @@ lsio_pwm3: pwm at 5d030000 {
> <&pwm3_lpcg 1>;
> assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
> assigned-clock-rates = <24000000>;
> - #pwm-cells = <2>;
> + #pwm-cells = <3>;
> interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
Even without patch #1 this is a good change. There are no usages of the
lsio_pwm* handles as of today's next. So no consumers need adaption.
Reviewed-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20231106/87322755/attachment.sig>
More information about the linux-arm-kernel
mailing list