[PATCH] ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Since commit c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK
specific PHY fixup")thet Ethernet PHY is no longer configured via code
in board file.

This caused Ethernet to stop working.

Fix this problem by describing the clocks and clock-names to the
Ethernet PHY node so that the KSZ8081 chip can be clocked correctly.

Fixes: c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
index 4ffe99ed55ca..07dcecbe485d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
@@ -121,6 +121,8 @@ ethphy1: ethernet-phy at 1 {
 			max-speed = <100>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };
-- 
2.34.1