[PATCH v4 0/3] board: imx8mn-rve-gateway: add support for RVE gateway board

[Hugo Villeneuve]

From: Hugo Villeneuve <hvilleneuve at dimonoff.com>

Hello,
this patch series add support for the RVE gateway board.

Thank you.

Link: [v1] https://lore.kernel.org/all/20231101144303.2653464-1-hugo@hugovil.com/raw
           https://lore.kernel.org/all/20231101144057.2653271-1-hugo@hugovil.com/raw
      [v2] https://lore.kernel.org/all/20231101183549.2960083-1-hugo@hugovil.com/raw
      [v3] https://lore.kernel.org/all/20231102193121.1676000-1-hugo@hugovil.com/

Changes for V2:
- Combine separate patches as a series. Start series at 2 to avoid confusion.

Changes for V3:
- Fix coding style / indentation
- Change vmmc supply for usdhc2 node
- Disable uart2 node instead of removing it.
- Remove MAINTAINERS board entry
- Add SOM compatible string
- Drop some status = "okay"

Changes for V4:
- Fix dtbs_check warning for compatible string "rve,rve-gateway"
  (remove acked by tag because of that change)

Hugo Villeneuve (3):
  dt-bindings: vendor-prefixes: add rve
  dt-bindings: arm: fsl: add RVE gateway board
  arm64: dts: freescale: introduce rve-gateway board

 .../devicetree/bindings/arm/fsl.yaml          |   4 +-
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8mn-rve-gateway.dts | 282 ++++++++++++++++++
 4 files changed, 288 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts


base-commit: 8f6f76a6a29f36d2f3e4510d0bde5046672f6924
-- 
2.39.2