[PATCH v2 2/2] arm64: dts: freescale: Add SKOV IMX8MP CPU revB board

[Oleksij Rempel]

Hi Andrew,

On Fri, Nov 03, 2023 at 01:35:46PM +0100, Andrew Lunn wrote:
> > +			port at 2 {
> > +				reg = <2>;
> > +				label = "cpu";
> > +				ethernet = <&eqos>;
> > +				/* 2ns rgmii-rxid is implemented on PCB.
> > +				 * Switch should add only rgmii-txid.
> > +				 */
> 
> Its unusual to actually see that. Its even more unusual its only one
> clock line. Can you actually see it on the PCB?

Yes. I even made a delay calculation by measuring this trace on PCB,
just to make sure I see it correctly.

> > +				phy-mode = "rgmii-txid";
> > +				tx-internal-delay-ps = <2000>;
> 
> Is this actually needed? rgmii-txid should add 2ns delay. Since this
> apparently works, i'm assuming setting tx-internal-delay-ps to 2ns
> does nothing, otherwise you would have a 4ns delay.

Without it the driver will complain:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/dsa/microchip/ksz_common.c?h=v6.6#n3496

but it works as expected.

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |