[PATCH v3 2/3] dt-bindings: arm: fsl: add RVE gateway board

[Krzysztof Kozlowski]

On 02/11/2023 20:31, Hugo Villeneuve wrote:
> From: Hugo Villeneuve <hvilleneuve at dimonoff.com>
> 
> Add DT compatible string for RVE gateway board based on a Variscite
> VAR-SOM-NANO with a NXP MX8MN nano CPU.
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Signed-off-by: Hugo Villeneuve <hvilleneuve at dimonoff.com>
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 32b195852a75..4cef18e46312 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -1018,6 +1018,7 @@ properties:
>                - fsl,imx8mn-ddr4-evk       # i.MX8MN DDR4 EVK Board
>                - fsl,imx8mn-evk            # i.MX8MN LPDDR4 EVK Board
>                - gw,imx8mn-gw7902          # i.MX8MM Gateworks Board
> +              - rve,rve-gateway           # i.MX8MN RVE Gateway Board

Eh, now it does not match your DTS.

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

Best regards,
Krzysztof