[PATCH v3 4/4] PCI: layerscape: Add suspend/resume for ls1043a

[Frank Li]

On Thu, Nov 02, 2023 at 11:09:00PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Oct 17, 2023 at 03:31:45PM -0400, Frank Li wrote:
> > ls1043a add suspend/resume support.
> > Implement ls1043a_pcie_send_turnoff_msg() to send PME_Turn_Off message.
> > Implement ls1043a_pcie_exit_from_l2() to exit from L2 state.
> > 
> 
> Please use the suggestion I gave in patch 2/4.
> 
> > Signed-off-by: Frank Li <Frank.Li at nxp.com>
> > ---
> > 
> > Notes:
> >     Change from v2 to v3
> >     - Remove ls_pcie_lut_readl(writel) function
> >     
> >     Change from v1 to v2
> >     - Update subject 'a' to 'A'
> > 
> >  drivers/pci/controller/dwc/pci-layerscape.c | 86 ++++++++++++++++++++-
> >  1 file changed, 85 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> > index 4b663b20d8612..9656224960b0c 100644
> > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > @@ -41,6 +41,15 @@
> >  #define SCFG_PEXSFTRSTCR	0x190
> >  #define PEXSR(idx)		BIT(idx)
> >  
> > +/* LS1043A PEX PME control register */
> > +#define SCFG_PEXPMECR		0x144
> > +#define PEXPME(idx)		BIT(31 - (idx) * 4)
> > +
> > +/* LS1043A PEX LUT debug register */
> > +#define LS_PCIE_LDBG	0x7fc
> > +#define LDBG_SR		BIT(30)
> > +#define LDBG_WE		BIT(31)
> > +
> >  #define PCIE_IATU_NUM		6
> >  
> >  #define LS_PCIE_DRV_SCFG	BIT(0)
> > @@ -227,6 +236,68 @@ static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> >  	return 0;
> >  }
> >  
> > +static void ls1043a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> > +{
> > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > +	u32 val;
> > +
> > +	if (!pcie->scfg) {
> > +		dev_dbg(pcie->pci->dev, "SYSCFG is NULL\n");
> > +		return;
> > +	}
> 
> Why scfg is optional for this SoC and not for the other one added in patch 2/4?

No, it is not optional for this SoC. This check can be removed as your
previous comments about 2/4.

> 
> > +
> > +	/* Send Turn_off message */
> > +	regmap_read(pcie->scfg, SCFG_PEXPMECR, &val);
> > +	val |= PEXPME(pcie->index);
> > +	regmap_write(pcie->scfg, SCFG_PEXPMECR, val);
> > +
> 
> In my previous review, I asked you to use a common function and just pass the
> offsets, as the sequence is same for both the SoCs. But you ignored it :/
> 

Sorry, I will fixed it at next version. 

> > +	/*
> > +	 * There is no specific register to check for PME_To_Ack from endpoint.
> > +	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
> > +	 */
> > +	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> > +
> > +	/*
> > +	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
> > +	 * to complete the PME_Turn_Off handshake.
> > +	 */
> > +	regmap_read(pcie->scfg, SCFG_PEXPMECR, &val);
> > +	val &= ~PEXPME(pcie->index);
> > +	regmap_write(pcie->scfg, SCFG_PEXPMECR, val);
> > +}
> > +
> > +static int ls1043a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> > +{
> > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > +	u32 val;
> > +
> > +	/*
> > +	 * Only way let PEX module exit L2 is do a software reset.
> 
> Same comment applies as patch 2/4.
> 
> - Mani
> 
> -- 
> மணிவண்ணன் சதாசிவம்