[PATCH] ARM: dts: stm32: add STM32F746 syscfg clock

[Ben Wolsieffer]

The syscfg syscon was missing its clock, therefore any attempt to
read/write it after clk_disable_unused() silently failed. This was
preventing external pin interrupts from working if they were initialized
after this point.

Signed-off-by: Ben Wolsieffer <ben.wolsieffer at hefring.com>
---
 arch/arm/boot/dts/st/stm32f746.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/st/stm32f746.dtsi b/arch/arm/boot/dts/st/stm32f746.dtsi
index 4942753d011e..cce6ab0e4617 100644
--- a/arch/arm/boot/dts/st/stm32f746.dtsi
+++ b/arch/arm/boot/dts/st/stm32f746.dtsi
@@ -501,6 +501,7 @@ sdio1: mmc at 40012c00 {
 		syscfg: syscon at 40013800 {
 			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SYSCFG)>;
 		};
 
 		exti: interrupt-controller at 40013c00 {
-- 
2.42.0