[PATCH] drm/exynos: fix race condition UAF in exynos_g2d_exec_ioctl

대인기/Tizen Platform Lab(SR)/삼성전자 inki.dae at samsung.com
Wed May 31 15:55:55 PDT 2023


Hi Andi,

> -----Original Message-----
> From: Andi Shyti <andi.shyti at kernel.org>
> Sent: Wednesday, May 31, 2023 9:06 PM
> To: lm0963 <lm0963hack at gmail.com>
> Cc: inki.dae at samsung.com; sw0312.kim at samsung.com;
> kyungmin.park at samsung.com; airlied at gmail.com; daniel at ffwll.ch;
> krzysztof.kozlowski at linaro.org; alim.akhtar at samsung.com; dri-
> devel at lists.freedesktop.org; linux-arm-kernel at lists.infradead.org; linux-
> samsung-soc at vger.kernel.org; linux-kernel at vger.kernel.org
> Subject: Re: [PATCH] drm/exynos: fix race condition UAF in
> exynos_g2d_exec_ioctl
> 
> Hi Min,
> 
> On Wed, May 31, 2023 at 06:54:34PM +0800, lm0963 wrote:
> > Hi Andi,
> >
> > On Wed, May 31, 2023 at 4:19 PM Andi Shyti <andi.shyti at kernel.org> wrote:
> > >
> > > Hi Min,
> > >
> > > > > > If it is async, runqueue_node is freed in g2d_runqueue_worker on
> another
> > > > > > worker thread. So in extreme cases, if g2d_runqueue_worker runs
> first, and
> > > > > > then executes the following if statement, there will be use-
> after-free.
> > > > > >
> > > > > > Signed-off-by: Min Li <lm0963hack at gmail.com>
> > > > > > ---
> > > > > >  drivers/gpu/drm/exynos/exynos_drm_g2d.c | 2 +-
> > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
> b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
> > > > > > index ec784e58da5c..414e585ec7dd 100644
> > > > > > --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
> > > > > > +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
> > > > > > @@ -1335,7 +1335,7 @@ int exynos_g2d_exec_ioctl(struct
> drm_device *drm_dev, void *data,
> > > > > >       /* Let the runqueue know that there is work to do. */
> > > > > >       queue_work(g2d->g2d_workq, &g2d->runqueue_work);
> > > > > >
> > > > > > -     if (runqueue_node->async)
> > > > > > +     if (req->async)
> > > > >
> > > > > did you actually hit this? If you did, then the fix is not OK.
> > > >
> > > > No, I didn't actually hit this. I found it through code review. This
> > > > is only a theoretical issue that can only be triggered in extreme
> > > > cases.
> > >
> > > first of all runqueue is used again two lines below this, which
> > > means that if you don't hit the uaf here you will hit it
> > > immediately after.
> >
> > No, if async is true, then it will goto out, which will directly return.
> >
> > if (runqueue_node->async)
> >     goto out;   // here, go to out, will directly return
> >
> > wait_for_completion(&runqueue_node->complete);      // not hit
> > g2d_free_runqueue_node(g2d, runqueue_node);
> >
> > out:
> > return 0;
> 
> that's right, sorry, I misread it.
> 
> > > Second, if runqueue is freed, than we need to remove the part
> > > where it's freed because it doesn't make sense to free runqueue
> > > at this stage.
> >
> > It is freed by g2d_free_runqueue_node in g2d_runqueue_worker
> >
> > static void g2d_runqueue_worker(struct work_struct *work)
> > {
> >     ......
> >     if (runqueue_node) {
> >         pm_runtime_mark_last_busy(g2d->dev);
> >         pm_runtime_put_autosuspend(g2d->dev);
> >
> >         complete(&runqueue_node->complete);
> >         if (runqueue_node->async)
> >             g2d_free_runqueue_node(g2d, runqueue_node);        // freed here
> 
> this is what I'm wondering: is it correct to free a resource
> here? The design looks to me a bit fragile and prone to mistakes.

This question seems to deviate from the purpose of this patch. If you are providing additional opinions for code quality improvement unrelated to this patch, it would be more appropriate for me to answer instead of him.

The runqueue node - which contains command list for g2d rendering - is generated when the user calls the ioctl system call. Therefore, if the user-requested command list is rendered by g2d device then there is no longer a reason to keep it. :)

> 
> The patch per se is OK. It doesn't make much difference to me
> where you actually read async, although this patch looks a bit
> safer:
> 
> Reviewed-by: Andi Shyti <andi.shyti at kernel.org>

Thanks,
Inki Dae

> 
> However some refactoring might be needed to make it a bit more
> robust.
> 
> Thanks,
> Andi
> 
> >     }
> >
> > >
> > > Finally, can you elaborate on the code review that you did so
> > > that we all understand it?
> >
> > queue_work(g2d->g2d_workq, &g2d->runqueue_work);
> > msleep(100);        // add sleep here to let g2d_runqueue_worker run first
> > if (runqueue_node->async)
> >     goto out;
> >
> >
> > >
> > > Andi
> >
> >
> >
> > --
> > Min Li





More information about the linux-arm-kernel mailing list